SeTool - Last Update Here !!!

dengel

Posted on 18/5/2006, 07:33

.

User deleted

GUI v0.91380025

- fixed "readdir" command
- full support for w700 added
- from now on restoration files will be distributed separate from main distribute. that is done for cases when only main or only rest files updated.
(you need BOTH rest files package and main package)

ps.
you CAN flash w700 fw into k750.
but no single advantage and you will lose camera
even if manually replace camera driver - it still refuses to work.

.

dengel

Posted on 18/5/2006, 08:16

.

User deleted

GUI v0.91380027

- finally j220/j230 fully working and tested (read codes/read flash/flash firmware)

.

dengel

Posted on 28/5/2006, 00:49

.

User deleted

GUI v0.91380028

- on some systems "protection error" appears, while older versions work ok. must be fixed.
- some lowlevel tuning

edit:

last-chance bug was found and fixed.
just redownload version from support.

.

dengel

Posted on 1/6/2006, 01:35

.

User deleted

GUI v0.91380029

- changed gui slightly - added CDA dropdown listbox. warning, cda list is saved when window closed (quit button)
- again some ll tuning.

.

dengel

Posted on 9/6/2006, 00:39

.

User deleted

GUI v0.91380030

- there was a problem - if you checked "unlock after flash" and flash lg3g red41/42/54, after flash phone was dead (need to unlock with tp afterward). that issue was fixed , it works like designed now.

- internal rebuilds, preparing for db2020 unlock and flash support.

IMPORTANT INFORMATION

SEMC, by error, released some number (BIG) of BROWN w700 with LOCKED OTP

when flashing, that phones will produce such errors:

Code:

CITAZIONE

.......
CSloader version:
060118 0312 EMPCXC1327364_COMPACT_SEMC_CS_LOADER
loader startup: executed
wrong responce, break.
loader filesystem startup failed, that is fatal

YOU NEED TO FLASH SPECIAL EROM from eroms\w700red_erom.ssw.cry and AFTER flashing that erom repeat complete sequence.

flashing any other EROMs will bring you to testpoint.

.

dengel

Posted on 24/6/2006, 01:02

.

User deleted

GUI v0.91380031

- now you can really flash any CID flash file in any CID phone.
- some bugfixes

.

dengel

Posted on 8/7/2006, 13:26

.

User deleted

GUI v0.91380032

as i promised, complete low-level rewrite is here.

many bugfixes, hopefully, not much new bugs.

changes:

- packages now simple zip files( backward compability with .pkg not maintained,sorry). That allows to use original semc customization packs and easy maintain any OWN customization pack
for usability added possibility to write package after flashing. If anything selected in "misc.files" field, it is threated as package and we try to write it into phone after flashing process. Note ! if you write original customization pack, you don't need do complete

customization files available on support. will add more models soon.

- fast imei patching added. works for all firmwares of semc,lg and sharp,which i have (and i have a lot of them). to use it there is plenty of ways:
1. check "patch otp<>gdfs check in firmware" , check "allow to change imei when unlocking" and press unlock
2. check same + "unlock after flash".press flash. phone will flash selected files, then will patch imei check and unlock/repair phone.
yes, imei patch works for w810/w300/k310/k510/z530

- i waited and waited, but nobody from semc "developers" came with patching of new firmware versions for sharp 703/903. so i tired of waiting and made it. Let they steal (as they usually do) and learn how to do things right.
yes,yes - direct flash patching of new firmware versions added.
sadly, i still can't get red73 loader (and i think will not get it for a loooong time), so you must use testpoint. it is not hard and safe, if use usb cable instead battery and be careful with needle.

- empty board handling changed. now, all you need to do is on empty board tab - recovery with brown cid49 ,enter IMEI, select erom if needed, select gdfs_in_ssw_format and press flash. after it, phone will be usual phone and must be handled in semc tab.

- my friend vasilius draw more user friendly GUI.

- profiles now auto-load when model changed. models slightly separated.

- connect ufs removed, now ufs simple another communication port

- latest ufs cables for k750 has one uart only, they not work at high speed when completing phone. it must be fixed now.

- unicode support when reading and writing files.

- MNC2/3 selectable support added in locks.

- updated drivers for ufs and 4in1 cable.

- other minor and major bugfixes and changes.

.

dengel

Posted on 8/7/2006, 13:52

.

User deleted

GUI v0.91380033

- bugfix - during flashing many phones at once software freezes.
- bugfix - lg3g patching code impoved to support some of latest fw.
- bugfix - with selected "w550/w600 old" complete not worked. fixed.

GUI v0.91380034

- bugfix - during ssw conversion of small files GPF occured
- bugfix - rare occuring bug during imei patch for w300/z530/w810/k510/k310 fixed
- bugfix - locks operation for for w300/z530/w810/k510/k310 fixed

.

dengel

Posted on 18/7/2006, 22:45

.

User deleted

GUI v0.91380035

- added server-based db2020 model flashing
- misc bugfixes
- rest files updated, was some errors in k600 rest files.

.

dengel

Posted on 26/7/2006, 23:29

.

User deleted

GUI v0.91380037

- by mistake, phone repowered during complete, fixed.
- profiles now saves settings separate for every model in every window.
- some other ll test improvements...

.

dengel

Posted on 2/8/2006, 02:06

.

User deleted

GUI v0.91380038

- nested directory creation during package restore was broken, fixed.

.

dengel

Posted on 10/9/2006, 13:22

.

User deleted

GUI v0.91380039

- SEMCsec released EROM updater for db2020.
it can help with red blink and "gdfs startup error:29" on db2020 phones.
it can't help to repair damaged security units.
it only works on com/ufs cables.

how to use - settings, set USE SERVER.
semc tab - select phone model
press recovery.

erom must be upgraded and possible your problem solved.

- some fixes in com cables and db2020 booting
- card unblocking not works as intended, fixed.

.

dengel

Posted on 10/9/2006, 13:40

.

User deleted

GUI v0.91380040

- protector update, now setool2 must co-exist with KAV
- it has been found, that in Z530 EROM not HW protected.

Because of that,possible to revive Z530 phones with damaged erom.
How to do:

on semc tab, select z530 in model list.
press recovery.
phone will be recovered and attempt will be made to repair EROM.
most possible, you will need to reflash phone in order to get it fully working.

warning. if you select z530 and will use recovery with k310/k510/w300/w810/z550 phone - you will receive dead brick. it is only usable for current breed of Z530 phones

.

dengel

Posted on 14/9/2006, 00:06

.

User deleted

GUI v0.91380041

- added brown to red db2020 conversion.
how to use.
UNCHECK "USE SERVER"
first, be sure your phone is cid49. (press identify and read "flash cid:49")
if not, go to "Empty Fill" tab, select CID49, press recovery - phone will be brown cid49
next, convert phone to red.
select correct model, select correct conversion EROM
(example - phone is k610, conversion EROM is eroms\k610_erom_cnv_brown2red.cry )
press flash.
your phone is read and ready to flash using credits system.
( because of obvious reasons filesystem read not supported for brown 2020,unlocking is not supported for brown 2020,well... only flashing possible )

- profiles auto load at startup now
- misc loaders updated
- recovery procedure for z530 updated a bit.

.