-
| .
|
|
|
Infinity Chinese Miracle-2 MTK/Mediatek v2.10 - New MTK chips and UFS storage
Infinity Chinese Miracle-2 MTK/Mediatek v2.10 - New MTK chips and UFS storage
As ordinary, unique functions and methods released
Core NewChip: Helio G90T (Formely MT6785) supported (UFS / eMMC) NewChip: MT6731 supported (eMMC / NAND) NewChip: Helio A20 (Formely MT6761 low-cost revision) supported NewChip: Helio P90 (Formely MT6779) support under test (UFS / eMMC) BugFix : MT6595/MT6597 BROM support broken, fixed (Agent 17xx-19xx)
New Feature : UFS FlashIC support !* Support flashing Factory / Infinity FW !* Support MemoryTool !* Support Factory Firmware reading !* Support Service operations !* SOC's on market, support UFS chips right now : G90, P70, P90
Service Changed : Repair security procedure updated (Flash and Meta mode) Changed : SPUnlock procedure updated (Flash and Meta mode) Changed : Identify procedure updated Changed : Format FS / Reset FRP now support UFS flash too New Feature : Modem Re-Init (NVfix) !* Useful after FixBB, in case of modem subsystem alive
Firmware Reader New Feature : UFS flash support New Feature : Combo scatter creation for newest chipset !* Produced scatter MAY NOT work with OLDER SPFT (factory flasher) below 19xx versions! !* Produced scatter is 100% like factory ones Changed : Improved structure identification Changed : Support more different types Changed : NAND support revised Changed : LEGACY line support revised Changed : Platform and version depend scatter creation for better compatibility with SPFT Changed : LEGACY line with Android 9 (MT6580 and similar) specific changes
MemoryTool New Feature : UFS flash support !* Support Read , Write , Erase partitions !* Support RePartition !* Support Preloader init !* Support Change Work mode (ADR / PRT) !* Change storage settings useless, all flash content mapped in single mode Changed : Structure identification Changed : Automatic files selection at folder change
Flasher New Feature : Support COMBO scatter's (v2.xxx) !* Automatic selection depend on device Flash (UFS/EMMC/NAND) !* Storage selection done automatic according detected, for end-user all selection and rest settings remain same as before New Feature : Support MTK chips with UFS FlashIC flashing !* All features (Erase / Verify / PMT upgrade / Backup / HW Compatibility) work for devices with UFS as well Changed : Scatter tab changes, specific to multi-storage selection and settings
Meta protocol functions updated Changed : Updated security detection feature BugFix : Updated structure verification
Other BugFix : A lot of minor changes and bugfixes applied Changed: Many internal changes to improve compatibility with other applications, antiviruses and similar software. Changed: Software load/operation speed improvements implemented
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash
As ordinary, unique functions and methods released
Core
Changed : FlashCore Protocol updated Changed : DiagCore Protocol updated Changed : NAND protocol adaptation Changed : Operations speed increased
Flasher Changed : Flash Engine updated Changed : Handling for 64bit files optimized Changed : Activated FastFlash V1 protocol * Changed : Activated FastFlash V2 protocol * !* FastFlash protocol allow increase flashing speed for big unsparsed images !* FastFlash protocol reduce flashing time up to 4-6 times, depend on device configuration - 3-4 minutes against 20-25 !* FastFlash activated automatically, if can be performed !* GOOD USB cable and GOOD USB port must be used - do not use USB HUBs ! Changed : Support for new PAC formats activated: v2.x.x line
Service Changed : Identify scheme : Read more accurate and complete info * !* Include modern Android 9 and Android 10 devices Changed : Precise FileSystem settings detection ( Type and Encryption algo ) Changed : Better security detection Changed : Format FS / Reset settings updated
Firmware Reader Changed : Reading speed up to 30% faster ! * !* Test feature, support modern UniSoc devices: SC7731E, SC9832E, SC9863 !* Test feature, only RS-featured loaders supported ! Changed : Android 10 support activated! * !* Support latest Android 9 and modern Android 10 devices from now! !* Allow read complete firmware image from Android 10 devices without loss any ota/vendor abilities Changed : X64 devices/loaders native support activated for complete reading Changed : SW now create Android-version depend images for better compatibility Changed : SW now create correct FileSystems bundle according device settings * !* Almost reducing "hang" case after flashing Changed : Improved structure identification Changed : Support more different types Changed : Structure identification and NAND reader more stable now (complete E-series NAND adaptation is on the way)
Model DB Changed : New loaders included for various set of devices Changed : New Generic loaders included and updated existing ones
Other Changed : Removed outdated options from platform tab, many options changed to atomatic mode BugFix : Minor changes and fixes
Info Android 10 enabled devices : SC7731E, SC9832E, SC9863 FastFlash enabled devices : SC9832E, SC9863
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 MTK/MediaTek v2.16 - Another step forward
Infinity Chinese Miracle-2 MTK/MediaTek v2.16 - Another step forward
As ordinary, unique functions and methods released
Core Changed : Protocol updated ( Raphael/Legacy ) BugFix : MT6737M/MT6580 Changed : Internal EMI engine rebuild !* LEGACY line : DB rebuild and updated, changed and optimized selection features !* RAPAHEL line : DB rebuild from scratch. Selection feature rebuild. Manual mode removed and changed to automatic. Summary : !* Supported almost all existing memory/dram combinations up to current date for LEGACY lines !* Supported almost all existing memory/dram combinations up to current date for RAPHAEL lines ( up to DIMENSITY line ) !* REMOVED manual EMI selection by bruteforce. NOT NEED ANYMORE set one-by-one internal EMI db counter and boot device every time. All auto. !* In rare case of discrette DRAM may require change EMI once for some specific devices !* After device learning ( via HW report feature ) it will be stored in SW Database and used automatic at every service/flash/repair operation !* Overall : Not need seek compatible preloader files for new/not existing FW's devices, spend time to bruteforce and etc. Just connect and work!
Flasher Changed : Core updated for LEGACY line BugFix : MT6737 with Android 10 flashing revised BugFix : Checksum verify rebuild BugFix : Changed memory repartition model for modern scatter formats ( used in Android 10 FWs ) BugFix : Different scatter-version dependencies handled now correct Changed : Core updated for RAPHAEL line Changed : UltraFlash feature updated, new security workarounds supported
Service Changed : Identify !* Legacy platform changes, mostly for Android 10 devices Changed : Smart Reset !* Optimized support for different customized and generic cases
NewFeature : HW Report ( RAPHAEL - only ) !* Allow read extended info from device about its HW - EXTCSD info ( complete, include eMMC version, all flags etc. ) - used in case of identification for HWrepair purposes - CSD info ( complete, TEMP/PERM write protection status ) - used in case of identification ReadOnly state in some cases - CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons - LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels - RPMB info ( is it key programmed or clean and can be re-used ) !* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init ) !* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug !* HWreport result may vary in diffirent models and agents, even on same SoC!
Firmware Reader Changed : LEGACY line support updated ( Android 10 line ) Changed : Support more different types Changed : FileSystem tools updated. Issues with reading on some systems should be fixed. Changed : More wide range of scatter versions creation according device specific data
Other BugFix : Lot of minor changes and fixes Option : GUI ( File -> GUI ) : allow select other interface mode !* Default - standard V2 line GUI !* Wide - best for big screen / big distance to monitor !* Wide Log - extend log window to screen size. Optimal for most cases
Info !* Strongly recommend to use ONLY Infinity or Factory firmwares for modern Android 9/10 device to avoid lot of issues - FOTA issues - Attestation Key Issues - Tee Key issues - Security issues
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.09 - SPUnlock for most SPD/UniSoc
Core Changed : FlashCore protocol updated
Flasher Changed : NVM manager updated. Recovery mode rebuild
Firmware reader Changed : SPRD Android 4.x line minor changes Changed : Improved structure identification Changed : New types supported (Android 9/10)
Service New Feature: SP (Network) Unlock activated ! - Support Legacy SPRD phones on SC7715/SC7731/SC9820/SC9832/SC9850 - Support modern UniSoc phones on SC9820e/SC7731e/SC9832e/SC9850/SC9853i/SC9863 - Support unlock in FlashMode ( ! recommended way, permanent ) - Support unlock in DiagMode ( ! may relock in some certain cases ) - Support unlock for signed and unsigned devices -- Unsigned/Legacy devices supported standalone without server -- Modern devices require server support Changed : NVM manager updated ( Read/Write process revised )
Other - Setting tab activated 1. Allow setup user details to use remote/server functions 2. Allow select Firmware path - Changed default paths for different operations - Minor changes and fixes
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features !
As ordinary, unique functions and methods released
Core Changed : FlashCore protocol updated NewSOC: UniSOC Tiger T61x series support NewSOC: UniSOC UIS7862 (Car HeadUnits SoC) series support NewSOC: SC7731E Android 10 / FastProto supported NewSOC: SC9832E Android 10 / FastProto supported
Flasher Changed : Protocol updated Changed : NVM manager updated Changed : FastFlash protocol updated ( SC7731E, SC9832E supported )
Firmware reader Changed : Android 10 specific changes Changed : Initial Tiger and NaT devices support Changed : UltraRead protocol updated ( SC7731E, SC9832E supported under 0S loaders now )
Service NewFeature: Security Repair allow change PSN1/PSN2 - In newer devices PSN1/2 damage may lead to bootlop, ota and other issues - In newer devices PSN1/2 used as bootloader token Changed : Identify : Correct MEMORY and RAM size reading for Android 10 devices Changed : Identify : Read PSN1 and PSN1 Changed : Identify : SC9832E and SC7731E can be used to verify eMMC ReadOnly state (0S loader mode) Changed : Repair : Identify signed devices during repair Changed : NVM : Read and Write operations revised
UserData Changed : UserData dump feature updated ( Legacy line fixes )
SPUnlock Changed : SC9863 support updated Changed : SC9832 support updated Changed : PermLock fix ( processed in automatic mode, fix issue with possible PermLock after first unlock try ) NewFeature: Error codes explanation and hints NewFeature: Damaged devices ( security destroyed ) detection NewFeature: Damaged devices ( permLock ) detection
Model DB Changed : New generic loaders included for SC7731E with Android 10 ( 0S type ) Changed : New generic loaders included for SC7792E with Android 10 ( 0S type ) Changed : New generic loaders included for Tiger T61x Changed : New generic loaders included for UIS7862 Changed : ZTE, Itel and others line loaders updated to support faster operatons amd more HW variants
Other Changed : GUI settings now stored and load select style, settings and other at next run Changed : Lot of different changes and fixes
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new features
Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features
As ordinary, unique functions and methods released
CM2MT2 v2.17 with info about MT67xx auth and test reports are HERE
Core Changed: Protocol updated ( Raphael/Legacy ) Changed: Loader v2044 supported and tested ( v2028 was unstable with MT6765 ) NewChip: MediaTek AC8227 (Car HeadUnits SoC) supported NewChip: MediaTek AC8257 (Car HeadUnits SoC) supported
Flasher Changed: Core updated for RAPHAEL line
Service Changed: META core updated
Changed: HW Report ( RAPHAEL - only ) - LifeStatus identify revised, in some cases it may shown wrong info. Strongly recommend use latest version for HWcheck ! !* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices (DRAM init) !* HWreport not require complete boot in case of semi-dead devices, it is useful for HWdebug !* HWreport result may vary in diffirent models and agents even on the same SoC !
Firmware Reader Changed: Some modern brand-specific changes (Oppo, Realme) Changed: New types supported Changed: Internal Database updated
Model DB Changed: New agents included for Tecno, Infinix ( with different SoC lines ) Changed: New DA base v2044 included
Other Changed: GUI settings now stored and load select style, settings and other at next run Changed: Environment compatibility issue with 32 bit OS has been fixed Changed: Many different changes and fixes
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 MTK/MediaTek v2.19 - Standalone MTK auth ON - NEW CPU
As ordinary, unique functions and methods released
Core: Changed: Protocol updated ( Raphael/Legacy ) AUTH: MT6580 with any security configuration supported standalone ! AUTH: MT6735 with any security configuration supported standalone ! AUTH: MT6737 with any security configuration supported standalone ! AUTH: MT6731 with any security configuration supported standalone ! AUTH: MT6739 with any security configuration supported standalone ! AUTH: MT6750 with any security configuration supported standalone ! AUTH: MT6755 with any security configuration supported standalone ! AUTH: MT6757 with any security configuration supported standalone ! AUTH: MT6761 with any security configuration supported standalone ! AUTH: MT6762 with any security configuration supported standalone ! AUTH: MT6763 with any security configuration supported standalone ! AUTH: MT6765 with any security configuration supported standalone ! AUTH: MT6771 with any security configuration supported standalone ! AUTH: MT6785 with any security configuration supported standalone ! AUTH: MT6795 with any security configuration supported standalone ! AUTH: MT6797 with any security configuration supported standalone ! AUTH: MT8163 with any security configuration supported standalone ! Changed: BootHelper package updated - Automatic Self-Learning function activated - Do not need to make HWreport anymore before other operations in most cases !
Service: Changed: META core updated Changed: Security repair features rebuild. Bugfixes.
Firmware Reader: Changed: Some modern brand-specific changes (Vivo, Meizu) Changed: New types supported Changed: Internal Database updated
Other: Changed: Many different changes and fixes
Info: Alternative MTK drivers package uploaded to support are, intstall it if you have any kind of connectivity issues
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 MTK/MediaTek v2.21 - MT67xx and MT81xx ON !
With this update we finishing following achievements: Complete MT67xx line support ! Complete MT81xx line support !
Core: Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6779 with any security configuration supported standalone ! AUTH: MT6799 with any security configuration supported standalone ! AUTH: MT8127 with any security configuration supported standalone ! AUTH: MT8167 with any security configuration supported standalone ! AUTH: MT8172 with any security configuration supported standalone ! AUTH: MT8173 with any security configuration supported standalone !
Changed: BootHelper updated - Automatic Self-Learning function improved Changed: EMI manager updated, most modern devices support has been included
Flasher: Changed: Core updated for RAPHAEL line
Firmware Reader: Changed: New types supported Changed: Internal Database updated
ModelDB: Changed: Some specific and brand list update
Other: Changed: Different changes and fixes
Installer: - Installer become more compact and now contain two parts: required and optional - Optional Installer CM2MT2-boot-pack contain optional (legacy) boot files
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.11 - Unlock, Repair, New CPU
Core Changed: FlashCore protocol updated NewSOC: UMS9117 support ( service mode )
Flasher Changed: Protocol updated Changed: NVM manager updated
Firmware reader Changed: Android 10 specific changes Changed: UltraRead protocol updated Changed: New types supported
Service Changed: Repair : Security Repair allow now repair signed devices - Permanent lock and other issues can be also fixed with that feature - Repair can be done in Flash and Diag mode - Repair support new security devices as well ( Android 10 + ) Changed: Repair : UMS9117 repair security support activated ( Nokia line supported included ) Changed: Identify : Enabled Read All Info by default under FlashMode Changed: FormatFS : UMS9117 Reset/Format FS support activated
SPUnlock Changed: UMS9117 support activated ( Nokia line supported included ) Changed: SC9863, SC9832 support improved
Other Changed: Many internal changes and fixes Drivers: UMS9117 drivers are at support area
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 MTK/MediaTek v2.22 - New models and features
Infinity Chinese Miracle-2 MTK/MediaTek v2.22 - New models and features
As ordinary, unique functions and methods released
Core Changed: Protocol updated (for Raphael/Legacy SoC) Changed: Loader v2112 supported and tested Changed: MediaTek MT6757 support revised Changed: StandAlone SLA now activated in automatic mode for phones that need it Changed: Driver dependency is not important any more, it gives more flexibility and more stable operations Changed: EMI DB updated, BootHelper updated NewChip: MT3561/MT3561S supported (CardHeadUnit)
Flasher Changed: Core updated for RAPHAEL SoC line Changed: UltraFlash engine updated
MemoryTool Changed: Long-range reading (over 32+ GB) optimized ( in most cases for Forensic cases ) Changed: LEGACY support revised
Service Changed: SmartReset function process updated Changed: New SmartReset mode activated - SmartReset Extra ! SmartReset Extra acts like ordinary ones but makes additional operations for specific brands: - Reset MiAcc for Xiaomi ( non-permanent ) - Reset FlyMe acc for Meizu ! Other vendor-specific scripts can be included by users requests Feature: "Restore Backup" option activated ( see Security tab ) ! Automatic restore backup for connected device if this backup was already created earlier by Identify, Settings -> Autobackup option
Firmware Reader Changed: Android 11 specific changes Changed: Brand-specific changes and fixes Changed: Better sparse handling Changed: New types supported Changed: Internal Database updated
Model DB Changed: Changed acting model to semi-auto ! In most cases it is enough just to select required operation and connect devices ( BROM mode preferable ) ! In some situations it may need to select older BASE DA for older SoCs ( LEGACY ones, since they are outdated ) Changed: New DA base v2112 included
Other Changed: Number of small changes and fixes Changed: Some unused options and checkboxes has been removed as deprecated, UI become easier
Infinity-Box as nobody else since year 2005
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 MTK/MediaTek v2.24 - UniversalBoot and other features
Infinity Chinese Miracle-2 MTK/MediaTek v2.24 - UniversalBoot and other features
As ordinary, unique functions and methods released
Core Changed: Protocol updated ( Raphael/Legacy ) Changed: BootHelper updated Changed: MT8172/MT8173 support improved Changed: MT6580/MT6752 support improved Changed: MT6735/MT6737/MT6753 support improved
NewFeature UniversalBoot: EMI Engine ! Allow boot device without need of preloader or whatever else, all settings got from device ! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported ! Some device may NOT work : Fully ERASED or RE-MARKED CID ! Feature ovveride default EMIDB , from Firmware and BootHelper ! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )
NewFeature UniversalBoot: AutoDA select ! At wrong base DA selection software will automatically change DA base for connected device ! Feature will select most correct, well tested and usable DA for target ! Must be installed complete bootPackage ( before v2.21 ) for correct work!
!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered ) !No other optional steps required
Flasher Changed: UltraFlash engine updated Changed: Legacy FlashCore rebuild ! Optimized for modern/old DA versions and different targets on OLD CHIPs ! Use of latest version for service LEGACY lines is strongly recommended Changed: Default FlashSettings updated
MemoryTool Changed: "Init GPT/PMT with resize" feature improved
Service Changed: "SmartReset" updated Changed: "SmartReset Extra" updated
Firmware Reader Changed: New types supported Changed: Internal Database updated
Other Changed: Some general changes and fixes
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 MTK/MediaTek v2.25 - MT68xx line, new models and features
As ordinary, unique functions and methods released
Core Changed: Protocol updated (Raphael/Legacy) NewSoC : MT6873 support activated NewSoC : MT6885 support activated (under test) Changed: BootHelper : core updated Changed: FireFly : EMI updated Changed: MT817x line support improved Changed: Boot : HWinfo parsing improved
Changed : UniversalBoot : EMI Engine ! Selection rules updated ! By default during Flashing used FW as source ! EMI collecting speed optimized, now more faster on auth-enabled devices ! BootHelper <> FireFly interaction optimized
NewSoC : MT6873 supported features ! Standalone SLA : supported ! FireFly : EMI : supported ! META operations : supported ! Firmware Read : supported ! Firmware Write : supported ! Reset Settings : supported ! Reset FRP : supported ! Misc Operations : supported
Flasher Changed: UltraFlash engine updated ! Tuned up for multi-failed regions ( like Huawei ) Changed: Default FlashSettings updated
Firmware Reader Changed: Huawei support activated! ! Allow read CORRECT firmware but not a useless/harmful dump etc. ! Sparsing for Huawei-specific partitions activated - extremely reduce FW size Changed: New types supported Changed: Internal Database updated Changed: Activated sparsing (reduce firmware size and increase flashing speed) for: ! - F2FS ! - HuaweiFS Changed: MT6873 specific changes ( new formats and types ) - Allow read CORRECT firmware without damage FOTA/OTA, Security etc. - Final result Firmware is like factory one Changed: MT6885 specific changes ( new formats and types ) - Allow read CORRECT firmware without damage FOTA/OTA, Security etc. - Final result Firmware is like factory one
Service Changed: META protocol updated ! Support MT68xx line ! Legacy bugfixes Changed: HWReport improved (MT68xx line support) Changed: "SmartReset" updated Changed: "SmartReset Extra" updated ! Vendor-specific mode activated for SAMSUNG phones ! Device brands, supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Other Changed: Many different general changes and fixes applied
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.13 - Boot RSA Auth activated
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.13 - Boot RSA Auth activated
As ordinary, unique functions and methods released
Core Changed: FlashCore protocol updated Changed: Automatic detection and use loaders with PMTInfo Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific ) - Allow service over FlashMode models, which require remote authentification - Supproted Brand lines: Itel - all RSA-auth enabled models - Supported default prod auth - Generic models, RSA and AES - After sucessfull auth you have full access to any service operations - flash read, write, frp, repair - Feature require Internet access and valid IOS username and password - Feature is free and unlimited for all currently supported models
Flasher Changed: Protocol updated
Firmware reader Changed: New range of generic and brand-specific models support for safe and complete Firmware Read Changed: NAND support revised
Model DB Changed: Moto G20 (XT-2821-X line) included in list (support under test)
Other Changed: Some changes and fixes
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 CM2MT2 v2.28 - MT6877, MT6893, Repair Security and more
Infinity Chinese Miracle-2 CM2MT2 v2.28 - MT6877, MT6893, Repair Security and more
As ordinary, unique functions and methods released
Core Changed: Protocol updated for Raphael / Legacy platforms NewSOC: MT6877 supported - any security state - SLA, DAA, Plain NewSOC: MT6893 supported - any security state - SLA, DAA, Plain Changed: FireFly / Infinity DA (Download Agents) updated Changed: NVRAM manager has been rebuild from scratch For now it covers all Old and Modern devices for Identify and Repair operations in FlashMode!
FireFly - Universal DA (Download Agent) that was created by Infinity Team to reach new service level and gives features
FireFly: NewSOC: MT6739 FireFly: NewSOC: MT6761 FireFly: NewSOC: MT6763 FireFly: New operations supported: Repair Security for Generic, Vivo and all other non-signed cases Read / Write NVRAM Restore Backup
Current list of supported SoC: MT6739 MT6761 MT6763 MT6765 MT6768 MT6771
Supported operations: Identify: Device Info ( Android ), HWInfo with Full eMMC and EOL info Format FS: Smart Reset, Extra and all other mode are supported MemoryTool: Allow execute ALL supported MemoryTool functions BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData Repair Security for Generic, Vivo and all other non-signed cases Read / Write NVRAM Restore Backup
Flasher Changed: UltraFlash engine updated and also any limitations has been removed Changed: Flash engine updated
Firmware Reader Changed: New types supported Changed: Internal Database updated Changed: MT6877 support Changed: MT6893 support Changed: Fake "Samsung" devices processing fixed
Service Changed: "SmartReset" updated Changed: "SmartReset Extra" updated Changed: "Identify" operation now show more security info Changed: "Identify" operation now show modem info/version Changed: New NVRAM engine/tools ! Read device security now works with Legacy (Old/New) and Raphael (Old/New) lines ! Rebuild check/verify procedures for modern devices ! Repair Security now works in flash mode for Raphael line too ( support most UNSIGNED types - Generic, Huawei, Vivo, Nokia etc. ) ! Repair security NOT work with vendor-signed devices ( you will get info about device not supported during operation ) ! Signed/Generic mode detection improved Changed: Restore Backup operation has been updated Changed: NVRAM read and write operations has been updated
Memorytool Changed: FireFly mode support updated
Other Changed: Many different general changes and fixes applied Feature: Feedback - BugReporting/DebugData collection module enabled. Feedback can be enabled/disabled during installation. ! Feedback feature made for fast, automatic reporting to team about new/unsupported devices in different operations without any additional need of actions from user side. ! That will allow bring server-side updates faster and make updates for new and unsupported phones, if need, every day!
|
|
| .
|
-
| .
|
|
|
Infinity Chinese Miracle-2 CM2MT2 v2.30 - More models & Features
Infinity Chinese Miracle-2 CM2MT2 v2.30 - More models & Features
Core Changed: Protocol updated for Raphael / Legacy platforms Changed: FireFly / Infinity DA (Download Agents) updated
FireFly FireFly: NewSOC: MT6580 [Legacy]
Current list of supported SoC: Legacy : MT6580, MT6735, MT6737 Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY !! On LEGACY devices in most cases UserData encryption can be not set !! FireFly allow boot/read devices even with dead DRAM - no need to desolder eMMC for data recovery!
Flasher Changed: UltraFlash engine updated
Firmware Reader Changed: New types supported Changed: Internal Database updated
MemoryTool Changed: UltraFlash activated by default, no more any write restrictions Changed: Read/Write/Erase operations revised
Service Changed: "SmartReset" updated for Legacy and old Raphael lines Changed: "SmartReset Extra" updated Changed: "SmartReset Data Safe" option activated Remove all APP and Security settings, retain userdata for Vivo, Oppo. It works for limited number of models at the moment, it depend on android version/build, use at own risk! Brand/model selection is not required, autodetection works
Other Changed: Many different general changes and fixes applied
|
|
| .
|
194 replies since 18/2/2007, 13:26 4883 views
.