Nuove versioni saras box

« Older   Newer »
 
  Share  
.
  1.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    Nel link sotto troverete le nuove versioni per tornado ufs ufficiali
    V02.08.000
    V02.08.001

    http://www.megaupload.com/?d=0WO1WWZ0
     
    Top
    .
  2. andrea57
        +1   -1
     
    .

    User deleted


    ..ultima release v02.08.002:
    http://www.megaupload.com/?d=RGOLWEKZ
     
    Top
    .
  3.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    Nuova versione di tornado

    HWK_Suite_Minor_v02[1].08.003

    link

    http://www.megaupload.com/?d=L08AB8US
     
    Top
    .
  4.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    Nuova versione di tornado

    HWK_Suite_Minor_v02[1].08.004

    link

    http://www.megaupload.com/?d=OLQCRJR3
     
    Top
    .
  5.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    Nuova versione di tornado

    HWK_Suite_Minor_v02[1].08.005


    WARNING !!!
    If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


    UFS_DCTxBB5 v2.0.8.5
    ----------------------

    1. New BB5 products: RM-412,RM-413,RM-443,RM-505,RM-506,RM-507,RM-570
    (E75-1,E75-2,6303c,N97-1,N97-5,N97-3,6600i-1)
    2. Introducing RAPU-YAMA ASIC: RM-368,RM-431,RM-432,RM-470
    (6260s-1,5630d-1,5630d-1b,6700c-1) support added.
    3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543
    (2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2)
    4. New DCT4+ UNL versions support:
    RH-99 v5.91, RH-100 v5.80, RH-105 v5.91, RH-106 v5.80, RM-305 v5.91
    (1200, 1200b, 1208, 1208b, 1650)
    5. Certificates write error in DL mode fixed.
    6. Check is ASIC supported by firmware for DCT4 and WD2 products.
    7. Read UEM IMEI or ESN for DCT-4/WD2 ASIC 2,5,6,11 when Rd UEM.
    8. Added backup of PM 120 block when make Bk.308 (if exists)
    9. Added [Skip Erase] option for BB5 products (for Experts Use Only)
    10.Added [1331] option, to switch on/off NU48Fxxx Intel Chips Solution.


    Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


    LG GSM V 2.0.8.5
    -----------------

    1. MTK KG195,KP199,KP220 support added.
    2. PCS files support added for MTK models.
    3. Cable type indicator.


    SAMs V 2.0.8.5
    ---------------

    V 2.0.8.5
    ------
    TRIDENT
    B100K,C140i added (DUNL,IM,FL)
    TRIDENT VISION
    C3010,C3050,C3060R,C3110,C3110C,S3500 added (CUNL,IM,FL)
    M120,M128,E1040,S3030 added (DUNL,IM,FL)
    B520 Vodafone support added.
    (use B520B-V model, not mix with B520, filenames are similar)
    (Use [Reset MMI] if phone ask for password without SIM)
    New MSL bypass algo introduced (B220,..,C3050,E1410,S3500...)
    allows direct codes reading, unlock and IMEI repair.
    MSL Repair introduced, allows to repair or use alien E2P
    (Repair of "User Fault on Illegal Trial !!" and restore IMEI)
    OM(SYSOL)
    C160G added (DUNL,IM,FL,SECT)
    SWIFT
    B2100,C5212,E250i,F265L,F270,J700i,M158,P250,U800E ,X576
    added (DUNL,IM,FL,SECT)
    SWIFT-AEROFONE
    B100i,B210 added (DUNL,IM,FL,SECT)
    C270,E1100,E1120,E1125W,E1125-SEA,E1210M,E1210S,E1310B,
    E1310M,E1310S,E1360B,E1360M,E2100,E2210 added (DUNL,IM,FL)
    (Do not mix B-C-M-L-S-T-EUR-SEA models! More info on support)
    B130S,B130T flashing fixed (blinking or frozen phone)
    (Must select target firmware as model, e.g. model is B130 and
    want to flash B130S, select B130S as the model.)
    SWIFT-3G
    P270 added (DUNL,FL,SECT,BT)
    QUALCOMM
    A777,M7600,M7603,M8800C,M8800L,S5600,S5603,S8300N added.
    [Write E2P] (NVM) added.
    UNLOCK and UNFREEZE added for these models: A411,A777,S7220,
    S7330,S8300,S8300C,Z230 (Use [QCDI Info] button to read keys)
    Old models UNLOCK and UNFREEZE: Z300,Z500,..,ZM60,..
    (these are not in models list, select any model. Use
    [Mobile Info] button to read keys & [Unlock] to direct unlock)


    Link:

    http://www.megaupload.com/?d=60J82BH5
     
    Top
    .
  6.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    Release Date: 18/08/2009

    The Official release is ready in our download area http://sarunasoftware.com.


    WARNING !!!
    If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


    Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

    You MUST update your HWK using client 2.0.9.0, old client versions will no longer work.

    You MUST be running HWK software 2.0.9.0 to access support.


    UFS_DCTxBB5 v2.0.9.0
    ----------------------

    1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,
    RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602
    (6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,
    6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)
    2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b)
    3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)
    4. Corrected VPL parsing for some models (N97)
    5. Only NU48F256 left in [1331] option and moved to BB5 Tab.
    6. SX4 bypass introduced using temporary NPC certificate erase.
    7. [One Boot] option introduced (RAPx based One MCU products)
    8. Enabled Files Multiselect, when Writing Certificates.
    9. Erase Option for BB5 (for Experts Use Only !)


    Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


    LG GSM V 2.0.9.0
    -----------------

    1. Unlock Codes Display for Infineon EGOLD Voice added
    (Boot and See NCK Code for Instructions Press UNLOCK)


    SAMs V 2.0.9.0
    ---------------

    TRIDENT
    T539 added (DUNL,IM,FL)
    TRIDENT VISION
    Fixed MSL algorithm for some models (C3050,...)
    SWIFT
    D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT)
    SWIFT-AEROFONE
    B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B,
    E2210B added (DUNL,IM,FL)
    QUALCOMM
    Manual Port Selection Added
    (Use Refresh, After Each Phone Reboot or Reconnect)
    (Untic QualComm Mode, Before Flashing)
    F480R,i6210,U900W added.
    UNLOCK and UNFREEZE added for these models:
    A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540


    We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.

    Conditions:-

    1. Only 1 contributer per language.
    2. You must know how to use the software and what each function does.
    3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.


    Many thanks to all those who have supported us!!!


    Odia.
    www.sarasbox.co.uk
    www.gsm-solutions.co.uk

    Link

    http://www.megaupload.com/?d=6WEPHEZP
     
    Top
    .
  7.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    HWK Release 23/03/2010

    --------------------------------------------------------------------------------

    Release Date: 23/03/2010

    The Official release is ready in our download area http://sarunasoftware.com.


    WARNING !!!
    If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


    Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

    You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.

    You MUST be running HWK software 2.0.10.0 to access support.


    UFS_DCTxBB5 v2.0.10.0
    -----------------------

    1. New BB5 products:
    RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635
    (6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)
    2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
    3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.
    4. McuSw tag fixed in vpl parser.
    5. Fixed time-out bug for some RAPU models.
    6. [Det.Log] CheckBox now active, can auto create LOG file.
    7. [Info] Shows Camera DCC settings and Status (for both Cameras)
    8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
    9. Increased PM read default margins, to have DCC in read PM for DCT4+
    10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
    11.Fixed [Format] bug for new BB5 Symbian products.
    12.ENO File flashing support (E63,E66,..,N97,..)
    13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20
    14.[Check] Shows PASUBTOC SL related contents.

    Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


    LG GSM V 2.0.10.0
    ------------------

    1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.
    2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.
    3. Infineon New Flash Chip SV7E3204UTA support.
    4. ADI KG129,KG248,KG298 added.
    5. " Cannot open file " Bug Fixed.

    SAMs V 2.0.10.0
    ----------------

    TRIDENT
    C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,
    X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
    USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
    TRIDENT VISION
    B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,
    S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
    MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)
    USB UI functions introduced, allows to unlock USB only phones.
    USB flashing introduced (Approx. 5x faster)
    (Cannot use USB flashing of dead phones which have UL erased or damaged.
    RJ45 flashing can be used to recover from erased UL situation)
    SWIFT
    A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,
    C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,
    F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,
    S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
    Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
    Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
    B5702,D988,F265L,S5050 (SECT) bug fixed.
    CSC Area format added.
    SWIFT-AEROFONE
    A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,
    E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)
    E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,
    E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
    SWIFT-3G
    C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
    P270 (CUNL,SECT) bug fixed.
    E2P Write is supported only for C5130,C5130S and C5130U.
    QUALCOMM
    A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,
    A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,
    S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,
    S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.
    Fixed flashing of non page size aligned files (rc1,rc2,ffs)
    Added flashing support for QSC62xx models.
    UNLOCK and UNFREEZE added for these models:
    A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,
    S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
    BROADCOM
    QC Legacy BroadCom models introduced:
    i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
    S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
    S7070 (CUNL,FL) To read codes use:
    [Mobile Info] button using USB Cable (Phone Switched-ON)
    and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
    QC Legacy BroadCom models Full Flashing (with BOOT Change)
    [BOOT Repair] for QC Legacy BroadCom models added.
    Boot Repair and Codes Read is possible only for phones with
    NM_20 pin USB/RJ45 connector !
    COMMON
    Log to file added.
    CLONE error message fixed.


    Many thanks to all those who have supported us!!!


    Odia.
    www.sarasbox.co.uk
    www.gsm-solutions.co.uk


    Official SarasSoft Rapidshare Mirrors:-

    http://rapidshare.com/users/VAY6Q3

    Edited by toky06 - 24/3/2010, 11:43
     
    Top
    .
  8.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    UFS_DCTxBB5 v2.0.10.1
    -----------------------

    1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.
    2. Box Init bug after BB5 flash fixed.


    Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


    Many thanks to all those who have supported us!!!


    Odia.
    www.sarasbox.co.uk
    www.gsm-solutions.co.uk


    Official SarasSoft Rapidshare Mirrors:-

    http://rapidshare.com/users/VAY6Q3
     
    Top
    .
  9.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    HWK Release 25/03/2010

    --------------------------------------------------------------------------------

    Release Date: 25/03/2010

    The Official release is ready in our download area http://sarunasoftware.com.


    WARNING !!!
    If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


    This release contains a new update client which you ONLY need to run if you have the message "None Authorised Copy of Software detected, Please Use Original Install Package:0" That means users without the message do not need to run this new update client, but if you do no harm will be done, you just lose 1 log.


    UFS_SAMs v2.0.10.2
    --------------------

    SWIFT-AEROFONE
    T239 added (CUNL,FL)
    BROADCOM
    Fixed UnFreeze Key Display.


    Many thanks to all those who have supported us!!!


    Odia.
    www.sarasbox.co.uk
    www.gsm-solutions.co.uk


    Official SarasSoft Rapidshare Mirrors:-

    http://rapidshare.com/users/VAY6Q3
     
    Top
    .
  10.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    HWK Release 12/05/2010

    --------------------------------------------------------------------------------

    Release Date: 12/05/2010

    The Official release is ready in our download area http://sarunasoftware.com.


    WARNING !!!
    If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


    UFS_SAMs v2.0.10.3
    --------------------

    V 2.1.0.3
    ------
    TRIDENT
    M628N added (DUNL,IM,FL)
    SWIFT
    A256,J218,S3600i,S3601C added (UNL,IM,FL)
    SWIFT-3G
    B2703 added (CUNL,FL,SECT,BT)
    QUALCOMM
    A747,C5510,C5510U,T929 UNLOCK and UNFREEZE added.
    Improved Decryption algo, more models UNLOCK and
    UNFREEZE supported by Default.
    BROADCOM
    S5230K,S5230R added (CUNL,FL,BRP)
    B5310,S5620,S5628,S7070C added (FL)
    Use Samsung Kies drivers for these models (B5310,S562x)
    Fixed 'Cannot Find NandInfo !' on some models.
    COMMON
    Log to file fixed for Trident models.
    Introduced New Extremely Fast Key Calculation Algorithm (DHLT)
    Need few hours for Tables generation at First Software startup.
    But after, Key calculation for Qualcomm, Broadcom and Trident
    platforms will take few seconds. DHLT (c)SarasSoft.


    Users who not want to wait few hours for DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into c:\Programmi\SarasSoft\UFS\UFS_SAMs\_DHT


    Many thanks to all those who have supported us!!!
     
    Top
    .
  11.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    HWK Release 06/07/2010

    --------------------------------------------------------------------------------

    Release Date: 06/07/2010

    The Official release is ready in our download area http://sarunasoftware.com.


    WARNING !!!
    If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


    LG GSM V 2.0.10.4
    ------------------

    1. Infineon GB107,GB108,GB115,GS100,GS101,GS102,GS105,
    GS106,GS107,GS108,KG289,KP109 added.


    UFS_SAMs v2.0.10.4
    --------------------

    TRIDENT VISION
    B3210M added.
    Bug in E2P Filename Display fixed.
    OM(SYSOL)
    On the Fly E2P Patch added to keep Original IMEI number.
    SWIFT
    C3212i added(UNL,IM,FL)
    On the Fly E2P Patch added to keep Original IMEI number.
    SWIFT-AEROFONE
    E1080i,E1086,E1086L,E1170,T139 added (CUNL,PUNL,PIM,FL)
    On the Fly E2P Patch added to keep Original IMEI number.
    On the Fly MCU Patch added to bypass MSL security for MSL3
    (MSLC16) products (E1080,E1080i,E1086,E1150,E1160, ...)
    after is possible Direct Unlock, Rebuild IMEI in normal way.
    QUALCOMM
    S3370,S5350M added (FL,CUNL,UNFR)
    S5350 added (CUNL,UNFR)
    Increased Speed in Communications (NVM Read/Write, RAM Read)
    BROADCOM
    B5310U added (FL)
    i6230,S3653M added (CUNL,FL,BRP)
    Combo Cable (USB+RJ45) Support added, not need Manipulations
    with Cable when use [QCDI Info]
    Corrected CSC,APP,PFS flashing for BCM2153 platform (B5310,..)
    [Boot Change] Product will Restart after success Boot Change,
    if Failed, will stay in Download Mode to Allow Retry.
    [Full Download] will Write All without Restart after Boot Change.
    COMMON
    [Refresh] will Show Avalaible Ports List with Full Names.



    Many thanks to all those who have supported us!!!


    Odia.

    Link:http://rapidshare.com/users/VAY6Q3
     
    Top
    .
  12.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    Release Date: 09/08/2010

    The Official release is ready in our download area http://sarunasoftware.com.


    WARNING !!!
    If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


    UFS_SAMs v2.0.10.5
    --------------------

    TRIDENT VISION
    M2513 added (UNL,CUNL,IM,FL)
    SWIFT
    Added MCU_Id and Type Display.
    Increased Preloader boot speed.
    QUALCOMM
    More Versions Support of Hidden Sysinfo models CUNL (S3370,..)
    A877,M7600H,M8800H,S5603T,S7120H,S8300T added.
    QUALCOMM+LSI
    M8910,M8910B,M8910H,M8910U,S8000,S8000B,S8000C,S80 00H,S8000U,
    S8003,S8500,S8500C added (FL)
    BROADCOM
    C3510T,M3710,S5560H added (FL)
    S3650H,S5230C added (FL,CUNL,UNFR,BRP)
    INFINEON
    Infineon Platform Introduced, See on [Sky/INF] Tab.
    E1151 added (CUNL,FL)
    DHLT Engine will ask about additional DHLT tables generation.
    COMMON
    [Refresh] will Auto Select Ports, be sure that Right Model
    and Mode is Selected (Untick [QualComm mode] when Flashing !)


    Users who not want to wait few hours for 3rd DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT
     
    Top
    .
  13.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    HWK Release 15/10/2010

    --------------------------------------------------------------------------------

    Release Date: 15/10/2010

    The Official release is ready in our download area http://sarunasoftware.com.


    WARNING !!!
    If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


    LG_GSM v 2.1.0.6 (HWK Required)
    --------------------------------
    1. Added NSCK,SPCK,CCK,SIM codes Display for GS10x


    UFS_SAMs v2.0.10.6
    --------------------

    TRIDENT
    X427 added (DUNL,IM,FL)
    TRIDENT VISION
    M2520 added (UNL,CUNL,IM,FL)
    Display of USER LOCK Key for All Models.
    SWIFT
    E2550,E2550D,E2558 added (UNL,SECT,IM)
    Notes:
    1.Chinese Versions E2550Zxxx select as E2558 for UNL,SECT,IM.
    2.E255x PRAM Flashing not Supported yet, use Original Flasher.
    B3410C,E2510C,S5050C added (UNL,IM,FL)
    Note: Chinese Versions B3410Zxxx select as B3410C.
    SWIFT-AEROFONE
    C3300D,C3300K,C3303,C3303K added (UNL,SECT,IM,FL) use 530Kom Cable.
    E1107-DX,E1107L,E1117-MEA-IND,E1130,E1130B,E1150-MEA-SEA,E1153,
    E1160-DX,E1220,E2120i,E2120L,E2121,E1252,E2121B,E2210T,E 2152,
    E2370 added (CUNL,PUNL,PIM,FL)
    Note: Mixing of DX MEA SEA Models causes Blinking or Dead Sets.
    [Restart] Button now Exit TAT mode with Battery.
    Auto Exit from TAT Mode when Flashing, not need
    Cable or Battery Reconnect after UI functions (Info,IM,..)
    SWIFT-3G
    J808,S5550,S5550U added (CUNL,SECT,FL)
    B7722,B7732 DUOS added (CUNL,SECT,FL) Flashing only Master Part.
    C3630C,C3730C,S3930C TD-SCDMA added (FL) use 530Kom Cable.
    QUALCOMM
    A657,A887,A897,M7600L,S5530,T559 added.
    BROADCOM
    A697,B3410W added (FL,CUNL,UNFR,BRP)
    S5250,S5253,S530,S5333 added (FL)
    Boot Repair Enabled for All Broadcom models, use 530Kom Cable.
    Some Models have encrypted Boot2.img and don't have uart_boot,
    for these models use our released Boot_Repair packs.
    Note: S562x with OneNand Flash Chip, Cannot be Repaired.
    Added Unlock support(CUNL) for Hidden Sysinfo models (S5560,..)
    if have no succes in SysInfo search, need ReFlash, to have untrashed FS
    COMMON
    Reduced/Full Log of TFS file list progress for OM/Swift.
    Improved FileOpen dialog, to Override suggested path
    to last used on same model.
    Used Abbrevations List can be seen at the Bottom of this page.
    DOCUMENTS
    Samsung B7722 How to Rev.1
    Samsung C3300_C3303 How to Rev.1
    Samsung S523x Warning Rev.1
    Samsung S7070 How to Rev.1
    Samsung Swift-Aerofone MSL3 Models How to Rev.1


    Many thanks to all those who have supported us!!!


    Odia.
     
    Top
    .
  14.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    Release Date: 26/10/2010

    The Official release is ready in our download area http://sarunasoftware.com.


    WARNING !!!
    If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


    UFS_SAMs v2.0.10.7
    --------------------

    SWIFT-AEROFONE
    E2152 FULL, _RD, E2P Write Bug Fixed.
    Note: E2152 DX Firmwares cannot be Properly Flashed.
    QUALCOMM
    B2710,S3370E added.
    QUALCOMM+LSI
    S8000L added (FL)
    BROADCOM
    S5620B,S5628i added (FL)
    COMMON
    Used Abbrevations List can be seen at the Bottom of this page.


    Many thanks to all those who have supported us!!!

     
    Top
    .
  15.     +1   -1
     
    .
    Avatar

    -=[Owner]=-

    Group
    *Super-Mod*
    Posts
    9,562
    PmB-Score
    +27
    Location
    ?

    Status
    Offline
    Free DCT-4 RPL

    --------------------------------------------------------------------------------

    All HWK User we offer you Free DCT-4 rpl.

    Note:-

    Supported ASIC ( 2,5,6,7,11)
    Generate ASK file by Rd UEM tab
    When Reading UEM:- Do not Set UEM changed if it is Not Changed (Empty)
    User Can Attach ASK file
    Each User ID of GSM-Hosting get only 5 rpl files
     
    Top
    .
25 replies since 20/2/2009, 18:43   3079 views
  Share  
.