-
dengel.
User deleted
v. 9137298
- change - if cda field is empty, it will be filled automatically
to fixed value during customize. also, customize is generic now,
no any pre-installed profiles/etc.
- change - further improved lg3g patching, now it is almost generic.
that means, that you can select model 8330 and use unlock on
new 8130/8138/8120 firmwares (no need downgrade/etc)
some other internal minor bugfixes/improvements.
v0.9137299
- bugfix - a new "generic" procedure for lg3g was reported to produce incorrect results. probably, fixed. ( i was tested it on different fw versions, but can't produces incorrect result)
please,if you find that that version incorrectly unlock your phone, please post, in beta discussion thread :
- log from setool2
- phone model and phone firmware version
- any files setool2 produce
v0.91373004
• change - added "old" sharp 703/903 "fast" unlock
• change - loaders updated
• bugfix - some other internal minor bugfixes/improvements.
GUI v0.91373005
- misc bugfixes, epiusb flashing improved, when flash many phones at once.
GUI v0.91373007
- added "new" sharp 703/903 flashpatch.
how to use ? suppose, we have a "new" sharp 703 or 903 at hands and we want make it say,euro. so, we flash patched firmware, after it we go to sharp tab, selecting "903/703" as model and simple pressing unlock. after it, power on phone.
GUI v0.91373008
- fixed booting of some "brown" phones
- change - added "new" sharp 703/903 flashpatch.
- bugfix - misc bugfixes, epiusb flashing improved, when flash many phones at once.
GUI v.91373009
- fixed w550 imei-change problem (with TP)
- added full support for no testpoint red cid49 k600/k608/v600
- added partial support for no testpoint red cid49 w550/w600
means, supported unlock,gdfs read/write,flashing of brown49 files.
special files for flashing w550 will be on support shortly.
- misc bugfixes
GUI v0.91373010
- fixed TESTPOINT booting of cid49 phones
- fixed recovery procedure of cid49 phones
- UFS activation removed.
GUI v0.91373011
- unblocked some cards
users must ask Unlocker for unblocking codes.
note, that FIRST startup after entering unblocking code is about 2 minutes long - it is okay and will happen only once.
GUI v0.91373012
- there was a sudden exits in any operations, fixed.
GUI v0.91373013
- RED49 W550/W600 no-tp flashig finalized (all operations works now and no special flashes need. warning ! not set your cid to anything <49 - phone will require testpoint to revive.
- added all needed EROMs in EROM folder.
- script is changed almost completely.
new command:
readpkg:/dir/in/phone
makes a file package for transferring to other phones (so-called customizing )
example:
readpkg:/tpa/user
new command:
writepkg: \package\on\pc
write previously backuped files back to phone
example:
writepkg:c:\package\k600\emea1.pkg
new command:
readdir:/starting/dir/in/phone
extracts all files and directories from phone to ph_out/ folder in setool2 directory
example:
readdir:/tpa/user
new command:
mkdir:/dir/in/phone
new command:
rmdir:/dir/in/phone
new command:
delfile:/file/in/phone.ext
changed command:to write a file into phone filesystem now use
wrfile:file\on\pc,/file/in/phone
now, short script example with explanations:
gdfsread:00000013
; read gdfs block 0 unit 0x13. variable will be written as ready script.
gdfsreadbinary:00000013
; read gdfs block 0 unit 0x13. variable will be written in raw binary form.
gdfswrite:00020CBF31323334
; write gdfs block 2 unit 0xcbf bytes 0x31323334 (ascii 1234)
chdir:/
; change dir to root
readfile:/tpa/preset/log.txt
; readfile sample
readfile:/tpa/preset/system/language/ru.lng
; readfile sample
readfile:/tpa/preset/custom/customize.xml
; readfile sample
chdir:/tpa
; change dir to /tpa
listdirs:
; show all directory and filenames
mkdir:/ifs/security/tester
; make directory example
wrfile:cora.fps,/ifs/security/tester/test.txt
; write file .\cora.fps to /ifs/security/tester/test.txt
makepkg:/ifs
; make package from /ifs directory as pkg_your_imei.pkg in current directory
delfile:/ifs/security/tester/test.txt
; delete file
rmdir:/ifs/security/tester
; delete directory (can only be done after all files removed)
writepkg:test.pkg
; write package from test.pkg
chdir:/ifs/security/tester
; chdir
listfiles:
; show all files in /ifs/security/tester
readdir:/tpa/user/
; extract all data to ph_out directory
GUI v0.91373014
- fixed error in script command readfile. thx to gezuzz.
( readfile:/phone/dir/filename.ext not worked as intended)
- some minor improvements in internal code.. -
dengel.
User deleted
GUI v0.91373015
- fixed IMEI change for all db2010 phones. thx to igorvod for bugreport.
- some minor improvements.
GUI v0.91373016
- lg u8550 (cid54) tp-less flashing (unlock via developers flash 07/08/etc)
- some minor improvements for multi-phones operations.
please note, you can flash ANYTHING into u8550. but once you will flash anything with certificate OTHER THAT RED54 - you will come to dead phone and only TP will cure it.
also please note, that when software says "DAMAGED SOFTWARE, REFLASH ORIGINAL", then YOU MUST FLASH ORIGINAL UNTOUCHED U8550 RED FIRMWARE (only main file)
Download GUI v0.91373016
Edited by dengel - 8/2/2006, 20:53. -
dengel.
User deleted
GUI v0.91373017
- cid49 added in empty board, sorry, forgot about it.
- progressbar is ok now
Download GUI 0.91373017. -
dengel.
User deleted
GUI v0.91373018
returned to old version of execryptor.
various bugfix. -
dengel.
User deleted
GUI v0.91380009
- added FULL RED CID49 NO TESTPOINT support for NEW W500/W600, NEW K600/V600/K608, W900, see notes below
- updated "direct flash patching" for new sharp 703/903 firmwares
- testpoint usage allowed on sharp phones now
- testpoint usage reduced during operations
- added profiles support
- added "phone id" button (test cable, recognize phone cid,etc)
- slightly tuned ignition on ufs/com/dss - must be better
- fixed imei changing problem on w550/w600 in no-tp mode.
- some other internal modifications
- new bugs (unknown yet)
notes on REDCID49 support.
first. it must work only on non-touched (new) phones.
if phone was "tuned" with other software - no any warranty, but, generally, it should work.
second.
during ANY operations red49 phone became unusable (dead) until you flash so-called "restoration" file or flash "main" part of phone flash.
i prepared restoration files for most versions of red49 firmwares,they resides in "rest" folder of setool2 distribution.
usage of restoration file is simple. just determine your firmware version and select corresponding restoration file in "restoration file" edit.
if your unlucky and there is no restoration file for yours version of firmware, then you must fullflash phone (WITHOUT TOUCH TO GDFS AREA), just main+fsimage+complete.
third.
during flashing w900 phones on some (i think most) com cables, CHECK option "disable USB" - phone somehow assumes it is on usb, but it is on com
fourth.
well, no more to say - go, try, cry or enjoy. preliminary beta testing shows
good percentage of success (99.9%)
some example:
q: i have red49 w550, i don't know what firmware version inside, i want it unlocked and russian.
a:
go to semc tab.
press clear names.
select needed w550 flashfiles (main,fsimage). russian inside emea1
go to settings tab. CHECK complete. CHECK "unlock after flash". UNCHECK "revert to red.
go to semc tab, press flash
when prompted, remove and insert battery, press button "testpoint ok"
phone must be unlocked and flashed.
q: i have k600, i want to unlock it, i know that inside r2ae001 version.
a:
select in "restoration file" edit correct restoration file.
press unlock.
when prompted, remove and insert battery, press button "testpoint ok"
phone must be unlocked and restored, means - working.
NOTES ON PROFILES
button "S" saves all files and settings for current model.
button "L" restores saved files and settings from current model.
profiles works on sharp,lg,semc tabs.
profiles common for all windows.
Edited by dengel - 14/3/2006, 00:25. -
dengel.
User deleted
GUI v0.91380010
- fixed IMEI changing with w900
- tuned communications with comport, fixed NAK-errors (at least for me)
- added "Identify" for brown phones
. -
dengel.
User deleted
GUI v0.91380011
- fixed ufs ignition with new drivers (i tested on 3.01.04)
- fixed identify
- again tuned com routines
- disabled recovery for all red49 phones (too much users killed their phones with it)
- returned old way for w550/w600 handling. -
dengel.
User deleted
GUI v0.91380012
- tuned ufs
- reverted to old comport routines
GUI v0.91380013
- csloader was broken when using testpoint on db2010 cid49 phones. fixed
GUI v0.91380015
- comport routines changed completely. need detailed test
- added very raw locks handling. only for those who needs it.
- fixed w900 gdfs write option
- fixed brown49 handling
- fixed numerous internal bugs,some ui improvements..
- new bugs added
a note about comport ignition... reminder - if phone not begins to boot, not stop program, but disconnect cable, remove battery, insert battery and attach cable....
Setool Last Version. -
dengel.
User deleted
GUI v0.91380017
just bugfix release
fixed some bugs
possible solved HT problem
some memory leaks
nothing usual
SeTool Last Version. -
dengel.
User deleted
GUI v0.91380018
- probably fixed db2010 cid49 problems (w550, error "bootloader not responds"). (note, it is not means that phones, killed by recovery can be repaired without tp with that version, it is only for those phones, which "hangs" on bootloader sequence)
- added support (experimental) for red49 k750/w800 phones. no rest files for them at moment - means you must reflash phone completely. of course, you can create own rest files, as usual.
- changed rest files behaviour . now, if "rest. file" edit is empty, program attempts to auto-search for version and auto-restore it from rest folder.
- changed EROMs for new db2010 models (to prevent phone death after change certificate)
- as usual, fighting with execryptor bugs (quits,crashes,etc)
- fixed other minor bugs.
- added new bugs (not know yet where and what )
Download. -
dengel.
User deleted
GUI v0.91380019
- added, FIRST IN THE WORLD, complete support for red49 w810/z530.
no-tp, of course. so. now setool first (as usual) supports all red49 phone line.
- updated restoration files.
flashes with most recent w810 and z530 is on support.
note- if you damage your erom - that version will NOT help you for any red49 phone.
a note to universaldongle - look at my work, steal it,use it - but know - you are always no.2 on scene.
same applies to other developers, who NOT came with w810 no-tp until now.
Download Setool Last Update. -
dengel.
User deleted
GUI v0.91380020
- fixed issue with UFS "dummy battery" cable, which CAN bring to dead red49 phone (can only be resurrected by tp).
probably that fix will brings more safe red49 operations.
- slightly updated rest files.
- different not important issues.
GUI v0.91380021
- CRITICAL bug fixed - db2000 red49 phones unlock was broken, which resulted constant "5 locks". fixed.
(sometimes even bad thing is good.
probably fixing that bug will help me to make lg3g red41/42 scrc fix without tp )
- updated rest files, added z530/w810/k750 gdfs in ssw format (frec folder). -
dengel.
User deleted
GUI v0.91380022
- added read files functionality for z530/w810 phones. some speedup,heheh.
- bugfixes (i not remember exact what i fix, maybe some ignition probs,maybe not)
- raw z300 support added (read codes,flash,read flash, read/write nvram).
latest flashfiles for z300 uploaded at support.
please note.
if you will write in yours z300 FULL readout from other z300 - it will go dead and only emma3 (at present) will resurrect it.
if you will write in yours z300 NVRAM from other z300 - it will became zombie too.
if you somehow manage to damage boot area (0x0++0x10000) - your phone is complete junk, can't be repaired NEVER. from my side, though, i done all possible so you CAN'T write boot.
so, you have been warned.. -
dengel.
User deleted
GUI v0.91380023
- readflash fixed
- some very internal problem fixed, hopefully damned exists will disappear.
- updated rest files
- added w550 gdfs in ssw format. -
dengel.
User deleted
GUI v0.91380024
- added experimental support for j220/j230 phones. not tested (i have not phone ), but must work. i put only pair of flashes for test. after (not) successful tests will add all other.
- fixed incorrect work of command "readpkg","readdir" when single root directory specified.
- rest files package synched with current rest files
Download SeTool Last Version.