-
.
--------------------------------------------------------------------------------
CycloneBoX Installer v1.20 (04.05.2012)
Things which introduced in new Version
- New Faster and reliable Hw introduced (Cyclone Box Reloaded)
- New Loaders v11.50.00 added
- FastMM v4.99 Introduced
- MEP-40488-004 added
- Xgold113 (Dual-sim) RPL write support added- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
- "News" added in main window
- "New Super Easy Downgrade" BB5 method added (Backup,flash,downgrade,restore rpl all just in one click)Tick in before-flash tasks
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
- Boot recovery added for all boxes during box wizard
- Added COD->NCK verification upon data generation
- After COD->NCK calculation, NCK codes are automatically stored inside COD file
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
- Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.
Improvements
- No need anymore to tick "Old USB flashing method" manually, it's detected automatically
- When Windows 7 is detected, software is not hidden to tray
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
- Automatic smartcard refill when empty addded
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
- Splash updated
- Box Registration module removed (box wizard introduced)
- Box Maintenance module removed (box wizard introduced)
- Card Maintenance module removed (box wizard introduced)
- The paths is now updated on each sw startup
- Only one copy of Cyclone Box application can be launched now, this improves stability
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- Skin Stack Updated to v7.62
Bug Fixes
- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
- Fixed Windows7 Save Paths/Settings problem
- BB5 loader problems when skin enbled (ROM refused...etc)
- Access violation on exit fixed
- CBUS Lost Handle Fixed
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- libeay/ssleay libraries updated to latest one, much more fast and stable
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
- Fixed tray issues
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did contain Superdongle/Simlock data only)
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confusion
- "security problem #1" solved on those who copied cyclonebox.dll before
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
- Minor changes and bugfixes
Important Notes
1. If you are using old (Classic) Cyclone Box and having old Card serial number (2009,2010) and after latest
bootloader upgrade, your box can't enter into bootloader mode, your box boot need Recovery. This will be proceeded AUTOMATICALLY, just use Box Wizard.
2. Box Maintenance, Box Registration, Card Maintenance are removed from this release
3. Your box having 3 update credits from now
4. Box Firmware v02.01 is required, so this update could be operational
5. Use "Box Wizard". This is one-click tool for box repair (boot recovery), upgrade, activation, registration, smartcard upgrade/initialization, and so on.
6. If you are using Windows 7, autoupdate in old version may fail (fixed already). In case download installer directly, or run SW with Admin privileges.
7. ALWAYS fresh installer you could find at: www.karwos.hk/CycloneBoxInstaller.exe
8. Autoupdate after updating EXE should ask you for downloading and installing latest installer. If something will fail during Autoupdate process, just look at 7 and download Installer manually.
. -
.
14-05-2012 CycloneBox Added all LG Phones Unlock By Imei SPOILER (clicca per visualizzare)How to Enter Unlock Codes on all LG Models
Different phones have different Unlock Code Input Instructions, Try the following Instructions in Order:
Method #1 Insert a non accepted simcard, and enter code when prompted for a code
OR
Method #2 Go to the dial screen and press “2945#*model number#”
for example if its a p999 you enter “2945#*999#” or if its a p990 you enter “2945#*990#” etc…
OR
Method #3 to the dial screen and press 2945#*71001# as if making a call, enter code when prompted
OR
Method #4 Go to the dial screen and press *#865625# as if making a call, enter code when prompted
---------- Alternative Code Input Instructions ----------
Follow these step carefully, as long as you have the correct code it will work 100%1. Power off and on your phone with different network sim card. "SIM network unlock PIN" or "Enter Network Lock Control Key" screen will appear.2. Type your Unfreeze code (MCK code) and hit Unlock button. You will get "unsuccessful message" again but don't worry.3. Type the Unlock code (Network or NCK code) and hit Unlock button.4. If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# (CAUTION! This will reformat all your data!)on phone keypad. Now wait until the phone is restarted. This operation will erase all data in your phone!5. Now type the Unfreeze code (MCK code) when prompted to enter "SIM network unlock PIN" or "Enter Network Lock Control Key" screen and hit unlock button. It will say "unsuccessful" again, don't worry!6. Type the Unlock code (Network or NCK code) and hit Unlock button.7. Your phone now give you the message "Network Lock Successful"Now your phone is successfully unlocked!How to Unlock LG (most models):
1. Insert not-allowed SIM card
2. Power on the handset- phone will display "phone restricted"
3. Select "Cancel" - phone will display "phone restriction code"
4. Enter the SIM unlock code
5. Select "OK" - the handset is now successfully unlocked
How to Unlock LG Phoenix p505
1. As if making a call press *#865625#
2. Click "unlock usim"
3. Click "unlock network"
4. Enter code, press OK
5. the handset is now successfully unlocked
How to Unlock LG E720 (Optimus chic)
1. Insert the NOT ALLOWED sim card.
2. On the keypad, type: " 2945#*720# "
3. The screen will then ask to enter the network code, enter the given NCK code.
4. Press unlock
5. And the cell phone is unlocked.
How to Unlock LG myTouch Q c800
1. As if making a call press 2945#*800#
2. Click "Network"
3. Click "unlock network"
4. Enter code, press OK
5. the handset is now successfully unlocked
How to Unlock LG Doubleplay
1. As if making a call press 2945#*279#
2. Click "Network"
3. Click "unlock network"
4. Enter code, press OK
5. the handset is now successfully unlocked
How to Unlock LG e900h
1. Enter a non accepted simcard
2. Phone will ask from "sim pin"
3. Enter unlock code provided
4. press OK
5. the handset is now successfully unlocked
How to Unlock LG Pop GD510
1. As if making a call press 2945#*510#
2. Click "unlock usim"
3. Click "unlock network"
4. Enter code, press OK
5. the handset is now successfully unlocked
How to Unlock LG GD570
1. Turn on phone with original SIM card or no simcard
2. Enter the following sequence *#865625#
3. Screen says you have entered unlock function, and cautions that after 10 failed attempts the phone will be permanently locked. Press OK to continue.
4. The phone will ask you to input the unlock code twice, do it. Be careful and type the code exactly as given.
5. After entering the code a second time, the phone will be unlocked.
6. Press OK to exit and the pone will reboot by itself.
How to Unlock LG Loop GT540
1. As if making a call press 2945#*540#
2. Click "unlock usim"
3. Click "unlock network"
4. Enter code, press OK
5. the handset is now successfully unlocked
How to Unlock LG CF360
1. Turn on phone with original SIM card or no simcard
2. Enter the following sequence *#865625#
3. Screen says you have entered unlock function, and cautions that after 10 failed attempts the phone will be permanently locked. Press OK to continue.
4. The phone will ask you to input the unlock code twice, do it. Be careful and type the code exactly as given.
5. After entering the code a second time, the phone will be unlocked.
6. Press OK to exit and the pone will reboot by itself.
Unlock Instruction for LG p509 Optimus T
1. Power ON your phone with not allowed sim card (one that didn't come with the phone)
2. Type 2945#*509#
3. The phone will ask you to input the unlock code twice, just input the NCK code
4. Device is now unlocked
Unlock Instruction for LG p500h Optimus T
1. Power ON your phone with not allowed sim card (one that didn’t come with the phone)
2. Type 2945#*500#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked
Unlock Instruction for LG Quantum
1. Turn on your phone with a non accepted SIM card
2. Phone will display “Phone Restricted”.
3. Select “Cancel” and the LG phone will display “phone restriction code”.
4. Now, enter your LG unlock code.
5. Select OK and your mobile should be unlocked!
Unlock Instruction for LG GT505
1. Power ON your phone with no simcard
2. Type *2945#505#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked
Unlock Instruction for LG KP500 Cookie or KP501 Cookie
1. Power ON your phone with no simcard
2. Type 2945#*71001#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked
Unlock Instruction for LG TU720 (SHINE) and VU
1. Power ON your phone with not allowed sim card (one that didn't come with the phone)
2. Type *#865625#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked
How to Unlock LG gw620 unlock
1. Insert original sim card and turn phone on.
2. Enter 2945#*620#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete
How to Unlock LG GS170
1. Turn on phone without SIM card
2. Enter 2945#*71001#
3. Choose unlock, press OK
4. Enter unlock code and press OK and phone is unlocked!
How to Unlock LG KG800 or TG800 Chocolate:
1. With the phone in standby, enter 2945#*7101#. This will activate the extra menu.
2. Go to: Settings > Security > SimLock > Network
3. Select deactivate. Enter the unlock code
Fido LG GW300 Gossip
1. Power on your LG GW300 with the original SIM card in.
2. Enter 2945#*300#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK.
5. Your LG GW300 may automatically reboot and should now be unlocked!
or
1.power phone ON without SIM
2.type 2945#*71001# to enter unlock menu
3. enter unlock code or codes
OR
1. Insert not-allowed SIM card
2. Power on the handset- phone will display "phone restricted"
3. Select "Cancel" - phone will display "phone restriction code"
4. Enter the SIM unlock code
5. Select "OK" - the handset is now successfully unlocked
LG GR500 Xenon
1. Insert not-allowed SIM card
2. Power on the handset- phone will display "phone restricted"
3. Select "Cancel" - phone will display "phone restriction code"
4. Enter the SIM unlock code
5. Select "OK" - the handset is now successfully unlocked
OR
1. insert original sim card and turn phone on.
2. Enter 2945#*9701#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
OR
1. After turning on your mobile phone, press: *#865625#
2. Press Yes to continue.
3. Enter the 16 digit Subsidy Unlock Code
4. Enter the 16 digit Subsidy Unlock Code, again.
5. Device should say: “Network Lock Deactivated”
6. Phone may automatically reboot
How to Unlock LG GS290 Cookie
with an original simcard
type 2945#*290# and insert NCK code
LG GS505 Sentio Unlocking Instructions
1. Turn on your LG GS505 Sentio with original SIM card
2. Enter 2945#*505#
3. A menu will pop up, select SIM unlock
4. Enter your unlock code and press OK
5. The phone will then reboot and your LG GS505 Sentio is unlocked!
How to Unlock LG GT350 Town
1. Power on your phone with the original SIM card or no simcard
2. Enter 2945#*350#
3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.
4. Enter your unlock code and hit OK.
5. Your phone will reboot and is unlocked!
How to Unlock LG C710h
1. Power on your phone with the original SIM card or no simcard
2. Enter 2945#*710#
3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.
4. Enter your unlock code and hit OK.
5. Your phone will reboot and is unlocked!
How to Unlock LG C2000:
1. Insert non-Cingular SIM card
2. Power on the handset - phone will display "phone restricted"
3. Select "Cancel" - phone will display "phone restriction code"
4. Enter the SIM Unlock code
5. Select "OK" - the handset is now successfully unlocked
How to Enter Unlock Codes on LG F2250:
1. With allowed sim card in the start menu type: 2945#*3311#.
2. Handset shows saved, then return to startup screen
3. Press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK'
4. Enter your unlock code and OK.
How to Enter Unlock Codes on LG U8150:
1. Switch ON your phone with a not allowed SIM card.
2. Compose: 277634#*#.
3. Go to menu "SIM Lock".
4. Enter the unlock code
How to Enter Unlock Codes on LG U8110:
1. With a not allowed sim card in your phone enter Pin code then validate, type: 277634#*#
2. Select 'Sim Unlock' menu #
3. Enter NCK code then validate
4. Your phone is now unlocked.
How to Enter Unlock Codes on LG U8210:
1.With a not allowed sim card enter Pin code then validate, type: 277634#*#
2.Shows test menu
3.Choose sim test menu and type: 2945#*#, choose Sim Unlock menu
4.Handset shows 'Enter NCK'
5.Enter code, then hit OK.
How to Enter Unlock Codes on LG U81xx:
1.To bring up the unlock menu on the phone with a SIM card, type 2945#*88110#
2.Enter the code
In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#.
How to Enter Unlock Codes on Cingular AT&T LG CU500:
1.Insert non-Cingular SIM card.
2.Power on the handset. Phone will display "Invalid SmartChip"
3.(IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4.In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
5.Enter the 8 digit SIM unlock code
6.Select "OK". The handset is now successfully unlocked.
Unlock Instructions for LG KU990 (Viewty):
1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.
Unlock Instructions for LG KF600:
1. insert original sim card and turn phone on.
2. Enter 2945#*71001#
3. A menu will pop up to enter the sim unlock code
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.
Unlock Instructions for LG KF750 aka LG SECRET:
1. Insert original sim card and turn phone on.
2. Enter 2945#*750#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete
Unlock Instructions for LG CU915:
1. Power ON your phone with an accepted SIM card.
2. Type *#865625#CODE
3. Press OK
4. Device is now unlocked
How to Enter Unlock Codes on LG Incite CT810:
1.Dial this into the LG Incite's phone menu
2.2945#*810#
3.Press CALL.
4.It should you ask you for the code.
How to Enter Unlock Codes on LG Invision CB630:
1.Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2.Dial this into the LG Incite's phone menu
3.*#865625#
4.Press CALL.
5.It should you ask you for the code.
How to Enter Unlock Codes on all other LG cell phones:
1. Switch ON your phone with an allowed SIM card
2. Then compose:
2945#*5101# - (if you have a LG 510w)
1945#*5101# - (if you have a LG 1200 & B1200)
2945#*5221# - (if you have a LG 5200 & 52200)
2945#*5301# - (if you have a LG 5300)
2945#*5401# - (if you have a LG 5400)
2945#*70001# - (if you have a LG 7020)
2945#*7101# - (if you have a LG 7100)
2945#*1201# or 2945#*70001# - (if you have a LG 1100)
2945#*70001# - (if you have a LG7250T)
2945#*2201# - (if you have a LG C2200)
2945#*5301# - (if you have a LG T5100)
2945#*3311# - (if you have a LG C3310)
3. Go to "Menu" and then to "Settings"
4. Then select "Security"
5. To finish select "Network Provider" and select "Deactivate"
6. Enter the unlock code
7. If your cell phone is not listed, please follow instructions for LG C2000 above
How to Enter Unlock Codes on LG KE970 Shine:
1.Switch ON your phone with an allowed SIM card
2.Then compose: 2945#*9701#
3.Press CALL.
4.It should you ask you for the code.
How to Enter Unlock Codes on CU575 / Trax and CU515
1. Put a non cingular sim in the phone ,phone says invalid smart chip
2. Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code
How to Enter Unlock Codes on CU500
1. Turn on phone with non-accepted SIM card
2. It will say on the screen "invalid smartcard"
3. Enter 159753#*#, it will bring you to the next screen
4. Enter your unlock code and press OK.
Here's how to unlock the EVE GW620R:
Unlock Instruction for LG GW620R
1) Power ON your phone with SIM Card that the phone is locked to
2) Type 2945*#620#UNLOCK CODE
3) Press OK
4) Device is now unlocked
Here's how to unlock the TU330
1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. SIM unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed
If Phone says, "Code Accepted" or "Network Unlock Successful" or "Not Yet Personalized" your phone is fully Unlocked
--------------------------------------------------------------------------------
Last edited by moulnisky; Today at 08:01. Reason: instructions added. -
.
Firmware v02.02 Released for Classic and Reloaded boxes!
-BlackBerry MEP-11534-010 Added (FIRST IN THE WORLD)!
- Support for MEP-09292-008 Fixed!
Just use “Box Wizard” to upgrade your box Firwmare!
Stay Tuned , Coming back Shortly with More Hot Stuff. -
.
!!!!! World First Update !!!!!
- Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
- Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added, WORLD FIRST
- Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added, WORLD FIRST
- Nokia N9 PM Write Added, WORLD FIRST
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added, WORLD FIRST
- Nokia N9 Reset FBUS/KEY NCK Counter Reset ADDED, WORLD FIRST
- Nokia N9 Send NCK via FBUS Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes
NOTE :
Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.
Few tests, Security Code Read w/o data loss :
Code:
[Nokia N9 USB Phonet]: Port opened OK!
Security Code 12345
Attempts 00SX4 Authorization (Make sure FORCE SX4 SERVER is TICKED)
Code:
[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready.
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
Disconnected from Cyclone ServerAnd just basic read info...
Code:
[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
IMEI Spare 3A75290314546404
IMEI SV 3375290314546404F0000000
CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343
PSN CZG234989
Product Code 059L7Z9
Module Code 0204965
Basic Product Code 059G8V7
PSD 0000000000000000
WLAN MAC 04A82A204D8F
Bootcode 2.0.49
Camera 0b:0125:02
APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA.
APE Test V 1.2.122
APE HW 1507
APE BT 00060000060d0020
RETU 11
TAHVO 00
AHNE 21
Asic 0
HW Signature
Simlock Server
Simlock Key 2440700000000000
Simlock Profile 0000000000000003
IMEI 357923041454648
Mastercode 555726146
IMEI Spare 3A75290314546404
IMEI SV 3375290314546404F0000000
CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343
PSN CZG234989
Product Code 059L7Z9
Module Code 0204965
Basic Product Code 059G8V7
PSD 0000000000000000
WLAN MAC 04A82A204D8F
Bootcode 2.0.49
Camera 0b:0125:02
APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA.
APE Test V 1.2.122
APE HW 1507
APE BT 00060000060d0020
RETU 11
TAHVO 00
AHNE 21
Asic 0
HW Signature
Simlock Server
Simlock Key 2440700000000000
Simlock Profile 0000000000000003
Simlock Aux
Simlock IMEI
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
[Nokia N9 USB Phonet]: Port opened OK!
Product Code: 059L7Z9
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering DCT4 Products - wait...
5 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering BB5 Products - wait...
8 Products left after filtering. Ready.
This is Valid BB5 Product
Retrieving Variants for Product RM-696 - wait...
1 Variants Retrieved
No variant found with given Product Code, selecting first one. -
.
Cyclone Box Firmware v02.03 Released
--------------------------------------------------------------------------------
Hi, new firmware for Cyclone Box is ready.
What's new?
- Added support for Blackberry MEP-14896-006 - FIRST IN THE UNIVERSE
Just update your box using "Box Wizard".
. -
.
Cyclone Box Firmware v02.04 Released
--------------------------------------------------------------------------------
Firmware v02.04 Released.
Added support for Blackberry MEP-27501-001
Added support for Blackberry MEP-09292-007
Just use Box Wizard to update your box
Stay tuned,
More to come,
Cyclone Box Team. -
.
[25.06.2012] Cyclone Box Installer v1.21 Released
--------------------------------------------------------------------------------
Hi to all, new Installer for Cyclone Box is ready to download.
What's new?SPOILER (clicca per visualizzare)=====================
Installer v1.21
25.06.2012
=====================
- New BB5 FBUs/USB Loaders v12.08.00 Added
- Qualcomm Based Products support added (Lumia 800, 610, etc)
- Normal mode Flashing is supported
- Dead-mode flashing is supported
- Downgrade is supported
- Support for Multi-CNT Qulacomm Configurations
- Support secure-erase USER Area - this takes about 15-25 minutes
- Basic read info including battery information etc for Lumia products
- Automatic Variant selection for Lumia products
- Cross-flash is supported, if Public Key hash matches
- After connecting product in Normal mode, Zune drivers must be installed. Take them from C:\Program Files\Cyclone Box\Drivers\ZuneDrivers
- Flashing drivers will be installed automatically, however on some problems just install them manually from C:\Program Files\Cyclone Box\Drivers\LumiaFlashing
- Abort Button improved
- SX4 Default Database updated, added 30 new models
- Nokia Connectivity cables drivers updated to v7.1.78.0
- Minor changes and bugfixes
Small tests:
800 FFSPOILER (clicca per visualizzare)If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:
1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.
Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 2012-02-17 14:40:05
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 08F70ECD76F6E4EE142BE82BA00143C3E4BC91036680A62C2A 3EF07508099060B5BCAD7BA00D151307A006BB
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM801_12w14_prod_generic_nokia_osbl.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:40:02
Signer S/N: 1725
Signer User ID: 10275021
Auth Level: Care
Data Encryption: 0
Image Index: 1
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 936.552kB @ 0x000000000007D200
Write taken 0.437s (Average speed: 17556,36kBits/s)
ESCO: Processing RM801_12w14_prod_generic_adsp.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:37:16
Signer S/N: 1735
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 3
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "adsp.mbn" (5.368MB)
Flushing...
Flushed OK
Write taken 7.847s (Average speed: 5730,02kBits/s)
ESCO: Processing RM801_12w14_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:40:01
Signer S/N: 1738
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (15.961MB)
Flushing...
Flushed OK
Write taken 24.243s (Average speed: 5515,28kBits/s)
ESCO: Processing RM801_12140_prod_760_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98022316
Signer Timestamp: 2012-04-20 12:32:28
Signer S/N: 1110
Signer User ID: 508009728
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 353.543MB @ 0x0000000010000000
Write taken 139.823s (Average speed: 21209,86kBits/s)
ESCO: Processing RM801_12w14_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:36:19
Signer S/N: 1719
Signer User ID: 10275021
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000003C000000-0x000000077DFFFFFF (29.32GB)
Erase taken 11.232s
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1750.0805.8773.12140
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer (c) Nokia
IMEI 359289045145774
Mastercode 5573422330
Public ID 8F07A22B55784E8C893370340D947D55
Product Code 059M3C1
Basic Product Code 059J2N6
Module Code 0205051
NCSd Version 1.9
HW Version 112.1402.2.3
SW Version 1750.0805.8773.12140
PSN Number 0022D28AB
ESN 00000000
WLAN MAC 6CE9070E42230000
BT ID 6CE9071AEF6B000000000000
Battery Life 35%
Battery Cycle Count 65535
Battery Temperature 38.6C
Battery Voltage 3795mV
Battery Flags 297
Battery Standby Current -6mA
Battery Max Load Current -800mA
Battery Health 860
Battery Average Current -27mA
Battery Remaining Capacity 482mAh
Battery Full Charge Capacity 1394mAh
Read info thread finished, continuing...
Flashing Successfull!
610 FFSPOILER (clicca per visualizzare)If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:
1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.
Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
Switching to RAW Mode...
[Nokia USB Connectivity]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v256.0
Build: 1
Timestamp: 2012-02-22 11:37:26
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 501AFF8D3A1D2B693BD8FEC40C1C55C5CB7F7E7DAF2FF78CEA 254978752CF80142347C1C31C0AB751C001F38
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM835_12w16_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-13 19:53:21
Signer S/N: 2315
Signer User ID: 10318699
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (18.229MB)
Flushing...
Flushed OK
Write taken 18.782s (Average speed: 8139,50kBits/s)
ESCO: Processing RM835_12w16_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-13 19:50:07
Signer S/N: 2312
Signer User ID: 10318699
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000004C000000-0x0000000795FFFFFF (29.160GB)
Erase taken 0.172s
ESCO: Processing RM835_12160_prod_296_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98030051
Signer Timestamp: 2012-04-19 06:27:32
Signer S/N: 953
Signer User ID: 2150079744
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 307.683MB @ 0x0000000028000000
Write taken 94.115s (Average speed: 27422,85kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1066.0000.8773.12160
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer (c) Nokia
IMEI 359313043774250
Mastercode 551675110
Public ID 88B3433D92343DDEFFED8DFC7EF2952F
Product Code 059P4D7
Basic Product Code 059L3R3
Module Code 0205127
NCSd Version 1.9
HW Version 112.1569.1.0
SW Version 1066.0000.8773.12160
PSN Number 0468BC2AB
ESN 00000000
WLAN MAC 3C363D77083A0000
BT ID 3C363D75337A0000FFFFFFFF
Battery Life 29%
Battery Cycle Count 65535
Battery Temperature 29.3C
Battery Voltage 3787mV
Battery Flags 312
Battery Standby Current -3mA
Battery Max Load Current -500mA
Battery Health 356
Battery Average Current 142mA
Battery Remaining Capacity 381mAh
Battery Full Charge Capacity 1322mAh
Read info thread finished, continuing...
Flashing Successfull!
Where from download?
ALWAYS FRESH installer you can get at: www.karwos.hk/CycloneBoxInstaller.exe
Uninstalling old version is RECOMMENDED before installing this one, however not ordinary.
You don't need to download Installer MANUALLY. It will be downloaded automatically, if you are having some of last Cyclone build with autoupdate module.
Lumia Flashing drivers will be installed automatically (according to your CPU architecture).
However, ZUNE drivers (when you are attaching phone in Normal mode) need's to be installed Manually from C:\Program files\Cyclonebox\Drivers\ZuneDrivers. This you need to ONLY ONCE.
Firmware upgrade is not needed.
. -
.
Modelli supportati in data 25/06/2012 SPOILER (clicca per visualizzare)RAPIDO: (SL1)
* N95 (RM-159)
* N95 (RM-245)
* N95 (RM-160)
* E90 (RA-6)
=======================
RAP3GV2 models: (SL0)
* 6630 (RM-1)
* 6680 (RM-36)
* 6681 (RM-57)
* 6682 (RM-58)
* N70 (RM-84)
* N70-5 (RM-99)
* N71 (RM-67)
* N72 (RM-180)
* N90 (RM-42)
* N91-1 (RM-43)
* N91-8GB (RM-43)
* N91-5 (RM-158)
* N93 (RM-55)
=======================
Rap3Gv3 phones: (SL1)
* 3109c (RM-274) -
* 3110c (RM-237) -
* 3250 (RM-38)
* 3500c (RM-272)
* 3500cb (RM-273)
* 5200 (RM-174)
* 5200b (RM-181)
* 5300 (RM-146)
* 5300b (RM-147)
* 5500 (RM-86)
* 5700 (RM-230)
* 5700 (RM-302)
* 6085 (RM-198)
* 6086 (RM-188)
* 6086b (RM-260)
* 6125 (RM-178)
* 6126/6133 (RM-126)
* 6131 (RM-115)
* 6131 NFC (RM-216)
* 6136 (RM-199)
* 6151 (RM-200)
* 6233 (RM-145)
* 6234 (RM-123)
* 6280/6288 (RM-78)
* 6290 (RM-176)
* 6300 (RM-217)
* 6300b (RM-222)
* 7370 (RM-70)
* 7373 (RM-209)
* 7390 (RM-140)
* 8600 (RM-164)
* E50 (RM-170)
* E50 (RM-171)
* E50 (RM-172)
* E61 (RM-89)
* E61i (RM-227)
* E62 (RM-88)
* E65 (RM-208)
* N73-1 (RM-133)
* N73-5 (RM-132)
* N75 (RM-128)
* N76 (RM-135)
* N76 (RM-149)
* N77 (RM-194)
* N80-1 (RM-92)
* N80-3 (RM-91)
* N92 (RM-100)
bb5+ (SL2)
=================
* 3120C
* 3555
* 3555b
* 5310 - (this FW V58.58; V59.59 are SL3 and need Credits or local Bruteforce)
* 5310b
* 5610
* 5610d
* 6263
* 6267
* 6300c -(V57.20 is SL3 and need credits or local Bruteforce)
* 6301
* 6500S - (this FW V59.60 is SL3 and need credits or local Bruteforce)
* 6500C - (this FW V59.45 is SL3 and need credits or local Bruteforce)
* 6555
* 7500
* 7900
* 8800
Rapido SL2
(note the firmware V30/V31/V300/V400 on the mobiles with PM308 Write protected can be unlocked via rpl method )
============
* 5320
* 5800
* 6110
* 6120c
* 6121c
* N705i
* N706i
* 6124c
* 6210
* 6220c
* 6290
* 6650
* 6760
* 6790
* E51
* E63
* E66
* E71
* E75
* N78
* N79
* N81
* N81 8gb
* N82
* N85
* N95 8gb
* N96
Supported unlock via NCK calculation new method (Free)
PA_SL2
===================
6300i (RM-337)
RAPS_V3.03-PA_SL2 CPU
===================
* 3600 slide -(this FW V56.26 is SL3 and need credits or local Bruteforce)
* 5220 XpressMusic (RM411)
* 5220b Xpress music (RM-410)
* 7210 Supernova
* 7310 Supernova
* 7510a
* 7610 Supernova
RAP3GS_V3.02-PA_SL2 CPU
=====================
* 6600 fold
* 6600 slide
* 6600i
SL3 Mobiles - 60 Credits/Mobile via server or Free via local bruteforce (the SL2 version of some of these models, any hash, is free and in local without needs for bruteforce)
===========
Rap3gv3 : via fbus
===============
* 2690 (RM-635)
* 2700c, 2700c-2 (RM-561)
* 2730c-1, 2730c (RM-578)
* 2730c-1b (RM-579)
* 3600s (RM-352)
* 3720c (RM-518)
* 3720c-2 (RM-518)
* 5130, 5130c-2 (RM-495)
* 5130c-2 (RM-496)
* 5310 Xpress Music (RM-303)
* 6300 (RM-217)
* 6303c (RM-443)
* 6500c (RM-265)
* 6500s-1 (RM-240)
* 7210c, 7212c (RM-436)
Rapido mobiles : Via Fbus or USB
==============================
* 5228, 5230, 5232, 5233 (RM-588/RM-593/RM-594/RM-625/RM-629)
* 5250 (RM-684)
* 5530 (RM-504)
* 5800d (RM-356/RM-428)
* 6120c (RM-243)
* 6760s (RM-573)
* 6790s (RM-492/RM-599)
* C6-00 (RM-612/RM-624)
* E63 (RM-437/RM-450)
* E66 (RM-343/RM-345/RM-420/RM-494)
* E71 (RM-346/RM-347/RM-357/RM-407/RM-493)
* E73 (RM-658)
* N86 (RM-484/RM-485/RM-486)
* N97 (RM-505/RM-506/RM-507)
* N97-4 mini (RM-555)
* N97-5 (RM-553)
* X6-00 (RM-551/RM-559)
Rap3gv4 Mobiles - Via Fbus
=====================================
* 3710a-1 (RM-509/RM-510)
* 3711a-1 (RM-511)
* 5330 (RM-479/478)
* 6303ci (RM-638)
* 7230 (RM-604)
* C2-01 (RM-721)
* X3-00 (RM-540)
RapuYama Mobiles - Via Fbus or Via USB
======================================
* 5630 (RM-431)
* 5730 Xpress Music (RM-465)
* 6350 (RM-455)
* 6700 Classic (RM-470)
* 6700s Slide (RM-576)
* 6710s Navigator (RM-491)
* 6720c (RM-424/RM-566)
* 6730c-1 (RM-547)
* 6750 Mural (RM-381)
* C3-01 (RM-640)
* C5-00 (RM-645/RM-688)
* C5-03 (RM-697)
* C6-01 (RM-601)
* C7-00 (RM-675)
* E52 (RM-469)
* E55 (RM-482)
* E5-00 (RM-632)
* E6-00 (RM-609)
* E7-00 (RM-626)
* E72 (RM-529/RM-530)
* N8 (RM-596)
* X3-02 (RM-639)
* X5-01 (RM-627)
* 808 (RM-807)
Rapu.V2 Mobiles - Via Fbus or Via USB
======================================
* 302 (RM-813)
* 500 (RM-750)
* 600 (RM-701)
* 700 (RM-670)
* 701 (RM-774)
* 702T (RM-730)
* C3-01.5 (RM-776)
Broadcomm mobiles - Via USB
================
* 2710n (RM-586)
* 7020a (RM-497)
* C3-00 (RM-614)
* X2-00 (RM-618)
* X2-01 (RM-709)
* X2-01.1 (RM-717)
* X2-03 (RM-709)
XGold213 (xgold-2)
======================
* C1-01 (RM-607/RM-608)
* C1-02 (RM-643/644)
* C1-03 (RM-607)
* C2-00 (RM-704)
* C2-02 (RM-692)
* C2-02.1 (RM-693)
* C2-03 (RM-702)
* C2-05 (RM-724/RM-725)
* C2-06 (RM-702)
* C2-07 (RM-692)
* X2-05 (RM-772)
* Asha 200 (RM-761/RM-762)
* Asha 201 (RM-799)
XGold113 (xgold-3)
======================
* 100 (RH-131)
* 101 (RM-769)
* Lumia
BLACKBERRY
All known Blackberry supported by IMEI & MEP
LG
All known LG Phones are supported by IMEI
SONY ERICSSON
Following models are supported by USB Cable
Xperia X10 Mini - E10i
Xperia X10 Mini Pro - U20
Xperia X8 - E15i
Xperia W8 - E16 - E16i
Xperia X10
Xperia X10i
Xperia X10a
Docomo SO-01B. -
.
Cyclone v1.0.1.684 Released, One-click FREE Simlock CS Repair for XGold213 Added!!
--------------------------------------------------------------------------------
Hi to all,
Cyclone v1.0.1.684
- Added FIRST IN THE WORLD, FREE One-Click Contact Service repair for XGold213 Based Phones. No need to buy RPL! Just click, and in 1 second your CS will go (if CS cause is bad simlock, and reason of this is NCK reset by free softs).
- Memory fragmentation issues fixed during Lumia Flashing
- Cursor problems fixed
- XP Usb support partially fixed
- Minor changes and bugfixes
Just run Cyclone, and autoupdate will fetch new version automatically.
. -
.
Cyclone v1.0.1.713 Released
--------------------------------------------------------------------------------
Hi, New update for Cyclone Box is ready.
What's new ?
- USB Booting problem solved
- Improved XGold2 Security Repair
- Improved RAPUv1, RAPUv2 USB Booting
- Minor changes and bugfixes
Update will be fetched automatically.
BR,
Cyclone Team. -
.
Hi, firmware v02.05 for Cyclone Box is Released.
New MEPs added:
MEP-12599-004
MEP-12907-003
MEP-17568-004
MEP-24660-002
MEP-26490-001
MEP-26900-001
MEP-27501-002
MEP-27559-001
MEP-27561-001
MEP-29080-001
MEP-40488-001
MEP-46976-001
Stay tuned..... -
.
28-08-2012] CycloneBox iphone imei check service restored
--------------------------------------------------------------------------------
iPhone IMEI check service is restored now.
Service is not free anymore.
Single check costs you 1 Cyclone Credit.
Once you've checked your phone, data is cached on server and you can check it again for free.
Example output:
Code:
Please Wait...
Cyclone Server (2.0.0.50), Cyclone Box Team 2008-2012 - Ready.
stdClass Object
(
[imei] => 013128003164xxx
[status] => Delivered
[carrier] => AT&T USA
[locked] => Yes
[created] => 1346098925
[delivered] => 1346098982
[details] => stdClass Object
(
[errorCode] =>
[serialNumber] => QR213MTGA4S
[productVersion] => 5.1
[countryCode] => US
[partDescription] => IPHONE 4 16GB BLACK
[appliedActivationPolicyID] => 52
[assetTag] =>
[futureDataA] =>
[futureDataB] =>
[ban] =>
[carrierCode] => AT&T USA
[contractStartDate] =>
[contractEndDate] =>
[deviceFamily] => iPhone
[firstUnbrickDate] => 1.334624276E+12
[initialActivationPolicyID] => 52
[lastRestoreDate] =>
[lastUnbrickDate] => 1.334625193E+12
[macAddress] => 6CC26B9B4E58
[nextTetherPolicyID] => 52
[unbricked] => 1
[unlockDate] =>
[unlocked] =>
[imeiNumber] => 013128003164559
[ctn] => 18329225876
[iccID] => 89014104243590399073
[formattedContractStartDate] =>
[formattedcontractEndDate] =>
[formattedFirstUnbrickDate] => 17/04/12
[formattedLastUnbrickDate] => 17/04/12
[formattedLastRestoreDate] =>
[formattedUnlockDate] =>
[initialActivationPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
[bluetoothMacAddress] => 6CC26B9B4E57
[nextTetherPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
[appliedActivationDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
)
. -
.
Hi, new update for Cyclone Box is ready.
=====================Installer v1.2209.11.2012=====================-
New CPU support added, XGold223 (Asha 308, Asha309)
- Supported operations: Write Flash, Read/Write Certificates, Read RPL, Write RPL, etc...- Firmware v02.11 Released
- Lumia SmartTP(R) introduced, for testers only (can detect short-circuits between Lumia eMMC Points (MISO,MOSI,CLK,CS), GND, or VCC, it shows also link quality). Use on _POWERED OFF_ PCB! When connecting power, it can show FALSE status! Very helpful during soldering time
.- New BB5 Loaders Added
- Lumia USB Flashing improved
- Latest Blackberry MEPs added
- Improved flashing speed and NPC certs reading time
- Improved CBUS protocol handling (sometimes it wents out of synchronization
- Fixed BSI spurious glitch problem with ~2.x firmware- Fixed DCT4 booting problems- Improved FBUS Local Mode entry - XGold213xx certificates Backup Added (NPC,HWC,CCC,...)
- XGold213xx Full Flash chip dump to BIN added- XGold213xx Low
-level PMM dump added (can dump PM from dead mobile)
- XGold213xx Low
-Level FILESYSTEM dump from dead mobiles added.
This dumps full FAT16 user data partition to BIN file for further actions (analysis, recovery, forensics, ...)
- Minor changes and bugfixes Notes about XGold 223 flashing: Switching to RAW mode is not supported (i.e. flashing from local/test mode, ROM will respons with empty public id (000000...) - very same story as with rapido)
. Battery reset needed, software will prompt you, but not always. Keep it noticed. Notes about XGold 223 RPL: Readen RPL is not full RPL backup (missing crypted PM308 data). This phone is very TexasInstruments
-Nokia like, but not really.
Once loaders with assymetric key hack is not ready, you SHOULDN\'T full erase your phone any way.
Autoupdate module SHOULD work, if not here is link:
www.karwos.hk/CycloneBoxInstaller.exe. -
.
Cyclone BOMB - Read UNLOCK Codes for Lumia, No TP, No BF, No Patch, Perm Unlock !!!
--------------------------------------------------------------------------------
Hi comrades, this is karwos speaking
I know you all missed me very much some, but here I am
And I hope will kick out soon this kret... Anyway, let's move what's new today...
ADDED ABSOLUTLY WORLD FIRST SIM UNLOCK CODES READ (NCK, MCK, PCK, NSCK, SPCK) for WINDOWS PHONE 8 based Devices (Lumia 820, Lumia 920)
- NO SOLDERING REQUIRED
- NO PATCHING REQUIRED
- NO BRUTEFORCING REQUIRED
- UNLOCK IS PERMANENT
- READ CODES TIME 2 SECONDS
- STANDALONE SOLUTION, NO NEED INTERNET ACCESS
- FREE AS LONG AS YOU HAVE CYCLONE IN HAND... YES YOU HAVE... AND IF YOU DON'T HAVE YOU WILL NEED IT SHORTLY, BECAUSE 2013 IS COMING TO BE PERFECT YEAR OF CYCLONE
How it works?
1. Run Cyclone
2. Connect phone to USB port
3. Go to Wp7/Wp8 tab
4. Select Simlocks
5. Click Read SP Codes
Verifying Connection with Test Interface...
TEST Interface not Found, Checking for Normal Mode...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
Switching to TEST Interface...
Dumping SP Data...
Set 1 (Unlock?)
PCK: 74173797
NCK: 55978966
SCK: 93011604
SPCK: 61927877
MCK: 29081609
Set 2 (Lock?)
PCK: 84585563
NCK: 11352073
SCK: 58136967
SPCK: 02882930
MCK: 03688856
Insert non-valid sim card and enter NCK code.
Ps. dont use read info in common. not yet implemented. Just go to read sp codes straightly.
Custom Boot writing for Wp8, Reading Codes for WP7, Patching WP7 devices (incl Lumia 900 and no need to write STOLEN original Qualcomm MMC bootloader, just small trick in OSBL ) devices will also come shortly...
How to update?
Just run Cyclone and new EXE will be downloaded automatically! (can take 15-20 minutes, as internet here is really S........T)
Best Regards,
karwos
Thanks for trusting and supporting us
BR
Cyclone team. -
.
!! BREAKING News!! NaviFirm is back !! Cyclone update !!
--------------------------------------------------------------------------------
Hi sweeties
I guess your life been much worser last days isn't it ?
No NaviFirm, is like not having RIGHT hand ....
Where from get your firmwares? How to work? How to life ??!!
But of course Cyclone ALWAYS have solution to THEIR customers..
yes... WORKING navifirm is now updated and built-in into CYCLONE.
No external file download, it will automatically find LandingZone and download
After download it will AUTOMATICALLY appear in BB5/DCT4/WP7 tab
OF COURSE THIS UPDATE IS FREE AND WORKS WITH CYCLONE BOX, KEY, ETC...
Life never been so easier before
Some shots:
www.karwos.hk/nf1.png
www.karwos.hk/nf2.png
www.karwos.hk/nf3.png
What to say more ... just run Cyclone and perform AUTOUPDATE, then .. only enjoy
STAY TUNED, MORE IS JUST AHEAD OF CORNER!.