-
.
Anyone with setool2 credits can test NTool
1 credit for flashing
1 credit for bootloader unlock generation
supported any HMD smartphone - nokia 1,2,3,5,6,6.1,7,7 plus,8
so far supported :
- flashing of original .NB0 files or original unpacked .NB0
!!! make sure you using proper firmwares for your phone model !!!
- FRP reset
- bootloader unlock signature generation
!!! make sure you double check IMEI and SERIAL NUMBER BEFORE REQUEST !!!
instructions to use bootloader unlock signature :
Code:
install fastboot drivers for phone.
power off phone.
run
fastboot flash unlock <signature file>
connect phone to cable
run
fastboot oem unlock-go
follow instructions on phone display if any
- EDL and BROM boot repair not supported yet, it is planned in next versions - so carefully check firmwares and not remove cable during procedure.
- ALWAYS connect powered off phone !!!
If phone in FASTBOOT mode - connect phone to cable, start operation, then press and hold volume up + power buttons until phone restart !!!
NTool v0.022
Code:
- support for .NBx firmwares added
please UNZIP firmwares before flashing - select only .NB0, NBx, .MLF - do not attempt to select .zip or whatever else.
NTool v0.025
Code:
- support for IMEI/MAC/BT repair of Nokia2,Nokia5,Nokia6,Nokia6.1,Nokia7,Nokia7 plus, Nokia8 Sirocco added
instuctions are simple :
- make sure you do not have any other applications, which can use ADB,like samsung companion,other tools
- install NOKIA HMD drivers from Drivers folder ( this should be done once, of course )
- press "SERVICE" button
- connect POWERED OFF phone
- wait, until "WRITE" button will appear, correct IMEI/MAC/BT addresses and press "WRITE" button
- do not do anything on phone during process
1 credit for flashing/service ( charged once for one phone )
1 credit for bootloader unlock generation ( charged each time )
if NTool will "stuck" on step "reboot to factory mode" and there is no device appear in device manager, reflash phone with firmware from support area.. -
.
NTool v0.026
- bootloader unlock signature generation not worked, fixed. -
.
NTool v0.028
Code:
- service operation working now for Nokia1, Nokia3, Nokia 8 phones ( Nokia X6 supported, but not tested )
for Nokia 8 service operation, phone must be flashed with Android 8.x firmware
- service operation can work now on Android 7.x firmware for Nokia2, Nokia5, Nokia6 phones
- number of bugfixes, mostly internal
Edited by toky06 - 30/5/2018, 11:45. -
.
NTool v0.029
Code:
- Android P preview firmware ( B2N-3050-0-00WW-B02 ) for Nokia 7 plus can't be flashed with NTool. Fixed.. -
.
NTool v0.030
Code:
- Nokia 3.1 ( codename ES2 ) support added
- support for SHARP AQUOS S2 added ( untested )
- some not important bugfixes. -
.
NTool v0.032
Added support for:
Sharp Aquos S2 , FS8010 ( service functions require android 8.x firmware )
Sharp Aquos S2 PLUS , FS8016 ( service functions require android 8.x firmware )
Sharp Aquos S3Mini , FS8018 ( after service function you need to reboot phone manually with volume up+power button )
Sharp Aquos Z3 , FS8009 ( bootloader unlock signature is NOT available for this model )
Supported functions:
Flashing of original .NB0 files or original unpacked .NB0
!!! make sure you using proper firmwares for your phone model !!!
Service operation (repair IMEI/MAC/BT)
FRP reset
Bootloader unlock signature generation
Download. -
.
NTool v0.035 added experimental unlock code calculation for next HMD smartphones
NTool v0.035
- added experimental unlock code calculation for next HMD smartphones :
Nokia 1
Nokia 2
Nokia 3
Nokia 3.1
Nokia 5
Nokia 6
Nokia 6.1
Nokia 7
Nokia 7 Plus
Nokia 8
Nokia 8 Sirocco
Nokia X6
Just fill IMEI and press "SIM UNLOCK" button, then enter calculated code, if server will be able to calculate it for you.
Please note, that phone must be working and ask unlock code, as we will not return credits for unlock code calculation.
unlock code generation cost is 30 credits and only allowed for accounts with at least initial 200 credits. -
.
Added to NTOOL support unlock
Added to NTOOL support unlock NOKIA 3310_3g , 3310_4g and 8110 by imei!
How to enter my Unlock Code on Nokia 3310_3g , 3310_4g , 8110?
1 - Switch ON your phone without SIM Card
2 - Compose #PW+YOURCODEHERE+1# or Compose #PW+YOURCODEHERE+7#
The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * ). -
.
NTool v0.036
Code:
- flashing engine revised for Android P firmwares
- added SKUID change to service functions
NTool v0.037
Code:
- Fixed issue, when original IMEI was restored after OTA update.
Just rewrite required IMEI1/IMEI2 with this version, no credits required ( account balance should be non-zero ).