Sblocco I-Phone Senza Smontaggio !!!

dengel

Posted on 13/9/2007, 01:20

.

User deleted

Unlock your iPhone for free without dissassembly

First, thanks to everyone who made this possible. Iphone Dev team, geohot and his crew, Iphonesimfree

and all others. And of course, thanks to the copycat HaRRo who keeps ripping off my tutorials - too bad you also copied my previous errors.

This is the real deal - unlock your iPhone for use with any SIM in less than an hour. Anyone with some computer experience will be able to follow this tutorial, since i've omitted all techincal details.

Step 1: Prepair your phone to install software

First of all make sure you upgrade your phone to latest firmware (1.02). This tutorial assumes you have version 1.02. To confirm, go to Settings → General → About → Version. Modem Firmware should also say 03.14.08_G. If you have an older version, you need to get your phone updated using iTunes. It should ask you to update when you connect your phone.

The phone needs to be jailbroken before you can upload software to it. If you are on Windows, i highly recommend downloading iBrickr, which i will use as an example through this tutorial. Extract all files to a directory on your PC, and run ibrickr.exe. Follow the instructions on screen. For more info, and video tutorial visit Nate True's website. Important: Make sure you don't have iTunes 7.4 or later! If you do, you need an older version of iTunesMobileDevice.dll in the same directory as iBrickr.

Step 2: Install and setup the software

Download and extract this archive of all required files to a directory on your computer:
- Needed files for iPhone unlock
(Note: Some of these files may be copyrighted and is not hosted by me. I will explain how to obtain them legally later)

Now you must bypass the activation mecanism on the iphone. Do this even if your phone is already activated (unless you used patched lockdownd method).

In iBrickr, click Files, and on the iPhone screen to the right, navigate to /usr/libexec/. Click Upload file, and select the file named lockdownd which you downloaded in the archive above. When it's done, restart your phone, and you will see that it goes right to the home screen without asking for activation.

Get your iPhone connected to your Wi-Fi access point by going to Settings → Wi-Fi → Your network. When it's connected tap the blue arrow on it and make note of the IP Address. Also, go to Settings → General → Autolock and set it to Never. This will make sure the phone does not go to standby and drop the Wifi connection.

Go back to iBrickr to install the Installer application, by clicking Applications → Browse applications button. You'll find Installer in the list.

Now you'll see a new icon called Installer on your iphone home screen, tap on it. It will connect to internet and download a list of available applications. First time you start it, it will probably find a new version of itself (Installer), tap on it then Update in the top right corner. When it's done updating, press the home button to exit and wait for it to refresh, then tap on Installer again. When installer is started again, install the following software in this order:

* Community Sources
* BSD Subsystem (might take some minutes)
* OpenSSH

Now you need to manually upload some files and executables to your phone. Use iBricker to upload the following files to your phone in the /usr/bin/ directory.

(All files are included in archive linked to at the start of this step)

* iUnlock
* ICE03.14.08_G.fls
* nor
* minicom
* bbupdater

Navigate to back to /usr/ directory, and click the Create folder button. Name it local. Click on your new folder, and inside it create another folder named etc. You should now be in /usr/local/etc/ where you must upload minirc.dfl.

Step 3: Performing the unlock

Now it's time to log onto your phone via SSH from your computer, using an application called PuTTY (or any other SSH client). In PuTTY, enter the IP-address you found previously in the Host Name field, and click Open button at bottom. If it's the first time, you will get a message you should click yes, and it will take some time to connect. Log in using username: root and password: dottie. Type the following commands (remember it's case sensitive!):

cd /usr/bin/
chmod +x bbupdater
chmod +x iUnlock
chmod +x minicom
launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist
iUnlock ICE03.14.08_G.fls nor

The last command will take about 20 minutes to complete. If it fails, it's important that you don't restart your phone, just try again (if you restart, Wi-Fi will stop working). To confirm that it went well run the following command: bbupdater -v (Click here to show/hide expected result)

# bbupdater -v
Resetting target...
pinging the baseband...
issuing +xgendata...
firmware: DEV_ICE_MODEM_03.14.08_G
eep version: EEP_VERSION:207
eep revision: EEP_REVISION:7
bootloader: BOOTLOADER_VERSION:3.9_M3S2
Done

Look for xgendata somewhere in the ouputs - if you find it, it means it was succsessfull!

Now, start minicom using the command: minicom. It should setup an AT connection to your baseband. If you get a warning telling you configuration file not found, go back and redo correctly. When minicom is loaded it should display something like this:

Welcome to minicom 2.2

OPTIONS:
Compiled on Jul 21 2007, 05:09:51.
Port /dev/tty.baseband

Press CTRL-A Z for help on special keys

AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
OK

Type AT followed by enter. It should respond OK. Now type the following two commands:

AT+CLCK=PN,0,00000000
AT+CLCK=PN,2

After the last one, it should respond with a zero if it does, phone is unlocked!

AT+CLCK=PN,0,00000000
OK
AT+CLCK=PN,2
+CLCK: 0

OK

(If you get ERROR after the first command, try to exit minicom (see below) and run bbupdater -v again, then start minicom and try once more.)

AT+CLCK=PN,0,00000000
ERROR
AT+CLCK=PN,2
+CLCK: 1

OK

To exit minicom, press CTRL-a followed by q and select Yes.

Now run the following command to enable the baseband:

launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

You are done! Put in any SIM and make a call to confirm!

thanks to mrhyde

.

Seba12

Posted on 13/9/2007, 20:38

.

User deleted

miticooooooooooooo!!!!!!!!!!!!!!!!!!

.

Adrsay64

Posted on 13/9/2007, 22:53

.

User deleted

Ma dai.....Quasi quasi faccio un salto in USA solo per avere lo sfizio di utilizzarlo con una sim italiana.(per il resto come vero e proprio cell non mi pare il max...)Comunque..... Dengel......Troppo forte!!!!!

.

anto_demeter

Posted on 17/9/2007, 10:52

.

User deleted

yes troppo miticoo!!!
concordo col fatto ke nn mi sembra chissà ke il nuovo prodotto apple!

.

metalmeccanico2000

Posted on 25/4/2008, 07:33

.

User deleted

Non è che qualchè volontario è disposto a tradurre il tutto x noi che non conosciamo l'inglese grazie

.

gylten

Posted on 20/6/2008, 11:54

.

User deleted

nn ho kapito un tubo io me lo dite in poke parole xfavore!^^

.

evakant140

Posted on 1/11/2008, 13:53

.

User deleted

avete mai sentito parlare di traduttori on line?
cmq io ho preso da poco il black berry pearl 8100, e non lo cambierei con un i-phone, per il semplice fatto che mi durerebbe troppo poco. Ho cmq avuto il piacere di usarne uno per 2 giorni, e vero è che non è il massimo, ma non fà nemmeno schifo

Ultima cosa, complimenti dengel!!!
Grazie a voi di pochi ma buoni, sono riuscita rimettere a nuovo parecchi cell, e non è poco!

.

dengel

Posted on 2/1/2009, 11:40

.

User deleted

progetto vecchio ormai superato.
Usate Quickpwn.

.